Abstract:In this paper, for an intensity wavelength division multiplexing (IWDM)-based multipoint fiber Bragg grating (FBG) sensor network, an effective strain sensing signal measurement method, called a long short-term memory (LSTM) machine learning algorithm, integrated with data de-noising techniques is proposed. These are considered extremely accurate for the prediction of very complex problems. Four ports of an optical coupler with distinct output power ratios of 70%, 60%, 40%, and 30% have been used in the proposed distributed IWDM-based FBG sensor network to connect a number of FBG sensors for strain sensing. In an IWDM-based FBG sensor network, distinct power ratios of coupler ports can contain distinct powers or intensities. However, unstable output power in the sensor system due to random noise, harsh environments, aging of the equipment, or other environmental factors can introduce fluctuations and noise to the spectra of the FBGs, which makes it hard to distinguish the sensing signals of FBGs from the noise signals. As a result, noise reduction and signal processing methods play a significant role in enhancing the capability of strain sensing. Thus, to reduce the noise, to improve the signal-to-noise ratio, and to accurately measure the sensing signal of FBGs, we proposed a long short-term memory (LSTM) deep learning algorithm integrated with discrete waveform transform (DWT) data smoother (de-noising) techniques. The DWT data de-noising methods are important techniques for analyzing and de-noising the sensor signals, and it further improves the strain sensing signal measurement accuracy of the LSTM model. Thus, after de-noising the sensor data, these data are fed into the LSTM model to measure the sensing signal of each FBG. The experimental results prove that the integration of LSTM with the DWT data de-noising technique achieved better sensing signal measurement accuracy, even in noisy data or environments. Therefore, the proposed IWDM-based FBG sensor network can accurately sense the signal of strain, even in bad or noisy environments; can increase the number of FBG sensors multiplexed in the sensor system; and can enhance the capacity of the sensor system.

An innovative method integrating two deep learning networks and hyperparameter optimization for identifying fiber optic temperature measurements in earth-rock dams

A real-time multi-defect automatic identification framework for concrete dams via improved YOLOv5 and knowledge distillation

Temperature tracing test and numerical simulation study during leakage of earth-rock dam

Research on Remote-Sensing Identification Method of Typical Disaster-Bearing Body Based on Deep Learning and Spatial Constraint Strategy

Unleashing potentials with deep learning: decoding the complex events for distributed fiber optic sensing applications

Φ-OTDR Signal Identification Method Based on Multimodal Fusion

High Accuracy and Cost-Effective Fiber Optic Liquid Level Sensing System Based on Deep Neural Network

Detecting unknown dams from high-resolution remote sensing images: A deep learning and spatial analysis approach

Distributed temperature monitoring of a pumped-storage power station rockfill dam using optical fiber sensors

Underwater crack pixel-wise identification and quantification for dams via lightweight semantic segmentation and transfer learning

Application of Distributed Optical Fiber Temperature Measurement System to Hydraulic Concrete

A deep learning-based approach with anti-noise ability for identification of rock microcracks using distributed fibre optic sensing data

A deep learning approach for signal identification in the fluid injection process during hydraulic fracturing using distributed acoustic sensing data

Improved Generalization in Signal Identification With Unsupervised Spiking Neuron Networks for Fiber-Optic Distributed Acoustic Sensor

Using a Machine Learning Algorithm Integrated with Data De-Noising Techniques to Optimize the Multipoint Sensor Network

An Energy Demodulation Based Fiber Optic Sensing System For Landslide Early-Warning

A deep learning model enabled multi-event recognition for distributed optical fiber sensing

Application of pipeline leakage detection based on distributed optical fiber acoustic sensor system and Convolutional neural network

Microseismic Monitoring and Analysis Using Cutting-Edge Technology: A Key Enabler for Reservoir Characterization

24 km High-Performance Raman Distributed Temperature Sensing Using Low Water Peak Fiber and Optimized Denoising Neural Network

Blind Source Separation Model of Earth-Rock Junctions in Dike Engineering Based on Distributed Optical Fiber Sensing Technology