Abstract:Abstract Chemical enhanced oil recovery (cEOR) relies on the interactions of the injected chemicals with the surface-active components (SACs) of the oil-in-place and the rock surface to induce favorable physico-chemical changes. In this study, we investigate the effect of oil composition on the performance of low salinity waterflooding (LSWF) in carbonate rocks using an integrated experimental approach. In addition, we assess the extent of usefulness of total acid number (TAN) as an oil screening criterion for LSWF application in carbonate reservoirs by using model oils that have different SACs, but the same TAN. A variety of characterization techniques including thermal gravimetric analysis (TGA), attenuated total reflectance (ATR-FTIR) and zeta potential (ζ) are performed to investigate the molecular-scale effect of oil chemistry on rock-oil-brine interactions during LSWF. Sessile drop contact angle measurements are also performed to quantify the influence of different SACs on the wettability of carbonate rock samples. Concurrently, coreflood experiments are performed to evaluate the effect of oil composition on the performance of LSWF in carbonate rocks in terms of Darcy-scale oil recovery. Results of this study show that oil chemistry significantly influences the performance of LSWF at all scales. Different molecular-scale interactions are observed in the presence of different SACs owing to differences in their affinity to the rock surface, strength of adsorption, solubility in brine, as well as their distinct pore-scale wetting abilities. These differences translate into significant variation in Darcy-scale oil recovery. In addition, carboxylic acid chain length is found to affect the amount of SACs adsorbed onto carbonate rocks during aging. Carboxylic acid chain length also affects the strength of adsorption, which in turn impacts the magnitude of wettability alteration during LSWF. Further, partitioning of SACs in brine is observed to influence the type of interactions taking place in the rock-oil-brine system, where carboxylate salts (soaps) generated in-situ are detected only in the presence of certain oil-brine pairs but not in the presence of others. Solubility of SACs in brine is also found to promote water-wetness. As a result, significant differences in the rate of oil recovery and ultimate recovery are observed when displacing four oils by the same low salinity brine at similar experimental conditions. Finally, the value of TAN is found to be insensitive to the type of acidic SACs present in the oil phase as long as they are monoprotic and their molar concentration in the oil is the same. Even within the same class of SACs, namely carboxylic acids, the usefulness of TAN is limited in differentiating between the type and molecular structure of the acid (i.e.: straight chain versus aromatic).

The effect of sodium carbonate on reducing the interfacial tension of petroleum sulfonate

Study on the Synergistic Effects between Petroleum Sulfonate and a Nonionic–Anionic Surfactant for Enhanced Oil Recovery

Effect of Salinities on Supercritical CO2 Foam Stabilized by a Betaine Surfactant for Improving Oil Recovery

Effect of oil displacement agent on corrosion behavior of NaCl - Alkali/ surfactant/ polymer flooding pipeline steel

Dynamic interfacial behavior between crude oil and octylmethylnaphthalene sulfonate surfactant flooding systems

Effectiveness of sodium sulfite as an electron acceptor for bioenhanced treatment of salt-containing water produced from ASP flooding

Laboratory Study on a New Surfactant/Polymer Formulation for Both Sandstone and Carbonate Reservoir

Research on the ratio of multicomponent emulsion flooding system

Structure-activity relationship of anionic-nonionic surfactant for reducing interfacial tension of crude oil

Interfacial Tension Between Crude Oil and Decylmethylnaphthalene Sulfonate Surfactant Alkali-Free Flooding Systems

A mechanistic experimental study on the combined effect of Mg2+, Ca2+, and SO42- ions and a cationic surfactant in improving the surface properties of oil/water/rock system

Spotlight on the New Natural Surfactant Flooding in Carbonate Rock Samples in Low Salinity Condition

Interfacial tension reduction mechanism by alkaline-surfactant-polymer at oil-water interface from experimental and molecular dynamics approaches

Polyetheramine enhanced biosurfactant/biopolymer flooding for enhanced oil recovery

Effect of Oil Chemistry on the Performance of Low Salinity Waterflooding: An Integrated Experimental Approach

Dynamic Interfacial Tension Between Crude Oil and Octylmethylnaphthalene Sulfonate Solution

Favorable Attributes of Alkali-Surfactant-Polymer Flooding

Effect of Anionic Surfactants on the Oil-Water-Rock Interactions by an Improved Washburn Method

Molecular Dynamics Study on Performance of Olefin Sulfonate at the Decane–Water Interface: Effect of Molecular Architecture

Experimental Study of Enhancing Oil Recovery with Weak Base Alkaline/Surfactant/Polymer

Laboratory studies on a novel salt-tolerant and alkali-free flooding system composed of a biopolymer and a bio-based surfactant for oil recovery