Abstract:Friction stir welding (FSW) is a promising technology for the joining of aluminum alloys and other metallic admixtures that are hard to weld by conventional fusion welding. Although FSW generally provides better fatigue properties than traditional fusion welding methods, fatigue properties are still significantly lower than for the base material. Apart from voids, kissing bonds for instance, in the form of closed cracks propagating along the interface of the stirred and heat affected zone, are inherent features of the weld and can be considered as one of the main causes of a reduced fatigue life of FSW in comparison to the base material. The main problem with kissing bond defects in FSW, is that they currently are very difficult to detect using existing NDT methods. Besides, in most cases, the defects are not directly accessible from the exposed surface. Therefore, new techniques capable of detecting small kissing bond flaws need to be introduced. In the present paper, a novel and practical approach is introduced based on a nonlinear, single-sided, ultrasonic technique. The proposed inspection technique uses two single element transducers, with the first transducer transmitting an ultrasonic signal that focuses the ultrasonic waves at the bottom side of the sample where cracks are most likely to occur. The large amount of energy at the focus activates the kissing bond, resulting in the generation of nonlinear features in the wave propagation. These nonlinear features are then captured by the second transducer operating in pitch-catch mode, and are analyzed, using pulse inversion, to reveal the presence of a defect. The performance of the proposed nonlinear, pitch-catch technique, is first illustrated using a numerical study of an aluminum sample containing simple, vertically oriented, incipient cracks. Later, the proposed technique is also applied experimentally on a real-life friction stir welded butt joint containing a kissing bond flaw.

An in-situ defect detection method for aluminum alloy bobbin tool friction stir welding assisted by lateral force

Study on the relationship between welding force and defects in bobbin tool friction stir welding

Force data-driven machine learning for defects in friction stir welding

Simulation of material plastic flow driven by non-uniform friction force during friction stir welding and related defect prediction

Variation Mechanism of Three-Dimensional Force and Force-Based Defect Detection in Friction Stir Welding of Aluminum Alloys

Quality assessment of friction-stir-welded aluminum alloy welds via three-dimensional force signals

The study on defects in aluminum 2219-T6 thick butt friction stir welds with the application of multiple non-destructive testing methods

Challenges in the detection of weld-defects in friction-stir-welding (FSW)

Development of Computational Approach for Analyzing In-Process Thermal-Mechanical Condition during Friction Stir Welding for Prediction of Material Bonding Defect

Numerical investigation on thermo-mechanical and material flow characteristics in friction stir welding for aluminum profile joint

The Investigation of Typical Welding Defects for 5456 Aluminum Alloy Friction Stir Welds

Experimental and Simulation Investigation on Fatigue Performance of H13 Steel Tools in Friction Stir Welding of Aluminum Alloys

Investigation on Material Flow and Microstructural Evolution Mechanism in Non-Thinning and Penetrating Friction Stir Welded Al–Cu Aluminum Alloy

Microstructures and Mechanical Properties of Non-thinning and Penetrating Friction Stir Welded 2219-T6 Aluminum Alloy

Simulation of Material Flow Behavior during Friction Stir Welding of 7075 Aluminum Alloy

The Effect of Interface Defect on Mechanical Properties and Its Formation Mechanism in Friction Stir Lap Welded Joints of Aluminum Alloys

Flow-coupled Thermo-Mechanical Analysis of Frictional Behaviors at the Tool-Workpiece Interface During Friction Stir Welding

On the Material Bonding Behaviors in Friction Stir Welding

Temperature Monitoring and Material Flow Characteristics of Friction Stir Welded 2A14-t6 Aerospace Aluminum Alloy

Applying a nonlinear, pitch-catch, ultrasonic technique for the detection of kissing bonds in friction stir welds