Abstract:Sorption performance of cation-exchange resins Amberlite® IRN77 and Amberlite™ IRN9652 toward Cs(I) and Sr(II) has been tested in single-component aqueous solutions and simulated waste effluents containing other monovalent (Effluent 1) or divalent (Effluent 2) metal cations, as well as nitrate, borate, or carbonate anions. The individual sorption isotherms of each main component were measured by the solution depletion method. The differential molar enthalpy changes accompanying the ion-exchange between Cs+ or Sr2+ ions and protons at the resin surface from single-component nitrate solutions were measured by isothermal titration calorimetry and they showed a higher specificity of the two resins toward cesium. Compared to the retention limits of both resins under such idealized conditions, an important depression in the maximum adsorption capacity toward each main component was observed in multication systems. The overall effect of ion exchange process appeared to be an unpredictable outcome of the individual sorption capacities of the two resins toward various cations as a function of the cation charge, size, and concentration. The cesium retention capacity of the resins was diminished to about 25 % of the “ideal” value in Effluent 1 and 50 % in Effluent 2; a further decrease to about 15 % was observed upon concomitant strontium addition. The uptake of strontium by the resins was found to be less sensitive to the addition of other metal components: the greatest decrease in the amount adsorbed was 60 % of the ideal value in the two effluents for Amberlite® IRN77 and 75 % for Amberlite™ IRN9652. It was therefore demonstrated that any performance tests carried out under idealized conditions should be exploited with much caution to predict the real performance of cation exchange resins under conditions of cation competition.

Effective sorption of strontium and cobalt ions from aqueous solutions using strong acid polystyrene gel cation exchange resin

Ion Exchange Treatment of Cobalt Acetate Solutions to Remove Iron(III) Impurity

SPEC Process II. Adsorption of Strontium and Some Typical Co-Existent Elements Contained in High Level Liquid Waste Onto a Macroporous Silica-Based Crown Ether Impregnated Functional Composite

Impregnation synthesis of a novel macroporous silica-based crown ether polymeric material modified by 1-dodecanol and its adsorption for strontium and some coexistent metals

Adsorption Behavior of Sr(II) and Some Typical Co‐existent Metals Contained in High Level Liquid Waste Onto a Modified Macroporous Silica‐Based Polymeric DtBuCH18C6 Composite

SPEC Process III. Synthesis of a Macroporous Silica-based Crown Ether-impregnated Polymeric Composite Modified with 1-Octanol and its Adsorption Capacity for Sr(II) Ions and Some Typical Co-existent Metal Ions

Separation of strontium ions from a simulated highly active liquid waste using a composite of silica-crown ether in a polymer.

Cesium and Strontium Uptake Utilizing a New Ternary Solid-State Supramolecular Adsorbent under a Framework of Group Partitioning

Retention Behavior and Dynamic Sorption of Strontium Ions from Aqueous Media Using Fabricated Inorganic Sorbent

Study on the performance and mechanism of cobaltous ion removal from water by a high-efficiency strontium-doped hydroxyapatite adsorbent

Competitive Adsorption of Strontium and Cobalt Onto Tin Antimonate

Sorption behavior of strontium and europium ions from aqueous solutions using fabricated inorganic sorbent based on talc

Soil variables for predicting potential phosphorus release in Swedish noncalcareous soils.

Effective Biosorption of Cesium and Strontium Ions from Aqueous Solutions Using Silica Loaded with Aspergillus brasiliensis

Selective Separation of Cobalt Ions from Some Fission Products Using Synthesized Inorganic Sorbent

Sorptive Removal of Cesium and Cobalt Ions in a Fixed bed Column Using Lewatit S100 Cation Exchange Resin

Selective removal of Sr2+ by cation exchange using silica-based titanate adsorbents

On the real performance of cation exchange resins in wastewater treatment under conditions of cation competition: the case of heavy metal pollution

Evaluating SiO 2 /Al 2 O 3 /poly(acrylic acid-co-glycidyl methacrylate) composite as a novel adsorbent for cobalt(II) radionuclides

The Carboxyl Functionalized UiO-66-(COOH)2 for Selective Adsorption of Sr2+

Preparation and Evaluation of a Mesoporous Calcium-Silicate Material (MCSM) from Coal Fly Ash for Removal of Co(II) from Wastewater