Abstract:The demand for the detection of ultralow concentrations of ammonia gas is growing. A bimetallic metal-organic framework (MOF) comprising Prussian blue analogs (PBAs) was used to achieve highly sensitive and stable detection of ammonia gas at room temperature in this study. First, PB was enriched by using ammonia for improved gas sensing properties. Second, a sensitive membrane with more vacancies was formed by partially replacing Fe3+ with Cu2+ through a cation-exchange strategy. Finally, a capacitive sensor was developed for ultralow-concentration ammonia detection using a Cu-Fe PBA sensitive membrane and interdigitated electrodes (IDEs). To investigate the adsorption efficiency of the designed composite sensitive film for ammonia, PBAs nanoparticles were deposited on a quartz microcrystal balance (QCM) via cyclic voltammetry and a hydrothermal method. Approximately 10 ppm of ammonia was adsorbed under 1 atm by the Cu-Fe PBA film prepared using a reaction time of 36 h, and the adsorption efficiency was measured to be 2.2 mmol g-1 using the QCM frequency response. The Cu-Fe PBAs were also tested using scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and Brunauer-Emmett-Teller theory. The introduction of Cu2+ ions significantly increased the specific surface area of Cu-Fe PBAs MOF, and the number of adsorption sites for ammonia also increased; however, its skeleton structure remained similar to that of PB. Then, the capacitive sensor based on Cu-Fe PBA sensitive membrane and IDE was fabricated and the gas sensing detection device was established for ammonia detection. Overall, the developed capacitive sensor exhibits a linear response of 75-1000 ppb and a detection limit of 3.8 ppb for ultralow ammonia concentrations, which makes it superior to traditional detection methods and thus allows excellent application prospects.

Enhanced electrocatalytic oxidation activity of platinum-poly(methylene blue) as a sensitive sensor for ammonia–nitrogen detection

Enhanced Sensitivity of Electrochemical Sensors for Ammonia-Nitrogen via In-Situ Synthesis PtNi Nanoleaves on Carbon Cloth

Achieving a High-Performance Electrochemical Sensor for Electrochemical Detection of Ammonia–nitrogen Based on Electrodepositing PtAu Alloys and Polypyrrole on Ni Foam

In-situ Fabrication of Carbon Cloth-Supported Polypyrrole-Platinum Nanosheets for the Electrochemical Detection of Ammonia–nitrogen

Sensitive Electrochemical Detection of Ammonia Nitrogen via a Platinum–Zinc Alloy Nanoflower-Modified Carbon Cloth Electrode

A Novel Electrochemical Ammonia–nitrogen Sensor Based on Carbon Cloth-Supported Hierarchical Pt Nanosheets-Ni(oh)2 Nanosheets Nanocomposites

Fabrication of a Ni Foam-Supported Platinum Nanoparticles-Silver/polypyrrole Electrode for Aqueous Ammonia Sensing

Fabricating a Self-Supported Electrode for Detecting Ammonia in Water Based on Electrodepositing Platinum-Polypyrrole on Ni Foam

Achieving Ni@(Pt/Ni(OH)2) Ternary Nanoflowers Derived from Ni Nanoflowers for Electrochemical Ammonia–nitrogen Detection in the Aqueous Environment

One Step and in Situ Synthesis of Ni Foam-Supported Pt-Ni(OH)2 Nanosheets As Electrochemical Sensor for Ammonia–nitrogen Detection

Electrochemical Detection of Ammonia in Water Using NiCu Carbonate Hydroxide-Modified Carbon Cloth Electrodes: A Simple Sensing Method

In Situ and One-Step Electrodeposition Growth of PtNi Alloys on Ni Foam for Electrochemical Ammonia-Nitrogen Sensing

Enhanced Ammonia Sensitivity Electrochemical Sensors Based on Ptcu Alloy Nanoparticles In-Situ Synthesized on Carbon Cloth Electrode

An Electrochemical Enzyme Biosensor for Ammonium Detection in Aquaculture Using Screen-Printed Electrode Modified by Gold Nanoparticle/Polymethylene Blue

Cuprous Oxide and Ag Modified Titanium Dioxide Electrode for Ultra-Sensitive Detection of Ammonia Nitrogen

In Situ Synthesis of Hierarchical Platinum Nanosheets-Polyaniline Array on Carbon Cloth for Electrochemical Detection of Ammonia.

High performance self-supported nickel oxalate/polyaniline electrode: a novel high sensitivity electrochemical ammonia sensor

Bimetallic MOF-Based Sensor for Highly Sensitive Detection of Ammonia Gases.

Development Of A Pt Modified Microelectrode Aimed For The Monitoring Of Ammonium In Solution

A Nonenzymatic Electrochemical Nitrite Sensor Based on Pt Nanoparticles Loaded Ni(OH)2/multi-walled Carbon Nanotubes Nanocomposites

Ni/MoN nanoparticles embedded with mesoporous carbon as a high-efficiency electrocatalyst for detection of nitroimidazole antibiotics