Abstract:Selective laser melting (SLM) has been widely used to manufacture customised metallic parts because it provides an integrated way to manufacture three-dimensional (3D) parts from computer-aided design models after several sub-processes. On the other hand, aluminium-based nanocomposites are widely used in the aerospace and automotive industries due to their light weight, high specific strength, excellent wear resistance, but their manufacturability and mechanical properties are not well understood when these new materials are employed in SLM. This is an important consideration because, compared with traditional manufacturing technologies, SLM offers the ability to manufacture engineering parts with very complex geometries by employing a layer-by-layer manufacturing principle. Hence, this thesis systematically studies the SLM of an advanced Al-Al2O3 nanocomposite that is synthesised using high-energy ball-milling (HEBM) process. The aim of this study is to use SLM to fabricate a nearly full dense Al-Al2O3 nanocomposite composed of 96 vol.% Al and 4 vol.% Al2O3 powder. The synthesis and characterisation of ball-milled powder is the first contribution of this study, which also investigates the influence of milling and pause duration on the fabrication of ball-milled composite powder. The second contribution of this work is the development of a 3D finite element model to predict the thermal behaviour of the first layer’s composite powder. Both the transient temperature distribution and molten pool dimensions are predicted within the laser scanning, which VI enables a more efficient selection of the process parameters (e.g. hatch spacing and scanning speed). The third contribution of this study is the optimisation of the SLM process parameters and microstructure investigation of the fabricated samples. The optimum laser energy density and scanning speed that are used to fabricate nearly full dense Al-Al2O3 nanocomposites are found to be 317.5 J/mm3 and 300 mm/s, respectively. The relative density is evaluated by quantifying the porosity on both the horizontal and vertical sections. The fabricated composite parts were observed to exhibit a very fine granular-dendrite microstructure due to the rapid cooling, while the thermal gradient at the molten pool region along the building direction was found to facilitate the formation of columnar grains. The final contribution of this study is the investigation of mechanical properties such as tensile strength, microhardness and macro and nanoscale wear behaviour. Compared to pure Al, the addition of 4 vol.% Al2O3 nanoparticulates was found to contribute to a 36.3% and 17.5% increase in the yield strength and microhardness of the composite samples, respectively. Cold working was found to contribute to a 39% increase in microhardness due to grain deformation. The pin-on-disc wear testing and atomic force microscopy (AFM) nanoscratching were performed to study the macro and nanoscale wear behaviour of the fabricated samples, respectively.

Particulate-reinforced Al-based metal matrix composites fabricated by selective laser melting: A comprehension review

A review of particulate-reinforced aluminum matrix composites fabricated by selective laser melting

Particulate-reinforced iron-based metal matrix composites fabricated by selective laser melting: A systematic review

Selective Laser Melting of Al-Based Matrix Composites with Al2O3 Reinforcement: Features and Advantages

Recent progress in particulate reinforced aluminum composites fabricated via spark plasma sintering: Microstructure and properties

Selective Laser Melting to Manufacture “In Situ” Metal Matrix Composites: A Review

Processing of Al-based composite material by selective laser melting: A perspective

Review of selective laser melting: Materials and applications

Recent Progress in Laser Additive Manufacturing of Aluminum Matrix Composites

Recent progress of aluminum alloys and aluminum matrix composites produced via laser powder bed fusion: a review

A Review of SLMed Magnesium Alloys: Processing, Properties, Alloying Elements and Postprocessing

Selective laser melting of an advanced Al-Al2O3 nanocomposite

Microstructure evolution and mechanical properties of Al-Al2O3 composites fabricated by selective laser melting

A brief review on the manufacturing of metal components using selective laser melting

A review of selective laser melting of aluminum alloys: Processing, microstructure, property and developing trends

A Review of Research Progress in Selective Laser Melting (SLM)

Additive Manufacturing of Magnesium Alloys by Selective Laser Melting Technology: A Review

State-of-the-art of selective laser melting process: A comprehensive review

An overview of powder granulometry on feedstock and part performance in the selective laser melting process

On the Selective Laser Melting (SLM) of the AlSi10Mg Alloy: Process, Microstructure, and Mechanical Properties

A review on factors influencing mechanical properties of AlSi12 alloy processed by selective laser melting