MPC-based DC-link voltage control for enhanced high-voltage ride-through of offshore DFIG wind turbine

Juan Wei,Canbing Li,Qiuwei Wu,Bin Zhou,Da Xu,Sheng Huang
DOI: https://doi.org/10.1016/j.ijepes.2020.106591
2021-03-01
Abstract:<p>To deal with the DC-link overvoltage during high-voltage ride-through (HVRT) of the wind turbine, a coordinated DC-link voltage control (CDVC) scheme is proposed for enhancing the HVRT performance of offshore doubly-fed induction generator (DFIG) wind turbines equipped with the supercapacitor energy storage system (SESS). This scheme is formulated as a two-stage control problem depending on the depth of grid voltage swell, which can prevent damaging the converter resulting from the insufficient reactive support in the first stage, and achieve efficient coordinated control under various magnitude and timescale of grid voltage swell. In the first stage, considering the dynamic behavior of the DFIG during HVRT, a voltage-dependent reactive current control (VRCC) scheme is designed to regulate the current reference of the wind turbine. The first stage aims to supply fast reactive current support without the DC chopper. In the second stage, once the DC-link voltage exceeds the predefined threshold, a coordinated control scheme considering the SESS and the wind turbine operation is implemented using model predictive control (MPC), aiming to regulate the excessive active power by tracking the current reference from the first stage. The proposed control scheme is validated in PSCAD/EMTDC under various operational scenarios. Case study results show that the proposed scheme can effectively mitigate the DC-link overvoltage and enhance HVRT capability under asymmetrical and symmetrical voltage swells.</p>
engineering, electrical & electronic
What problem does this paper attempt to address?
The problem that this paper attempts to solve is the DC - link over - voltage problem of offshore doubly - fed induction generator (DFIG) wind turbines during grid voltage rise (high - voltage ride - through, HVRT). Specifically, when there is a sudden increase in grid voltage, the DC - link voltage of the wind turbine will rise rapidly, which may lead to a series of transient problems, such as rotor inrush current and torque oscillation, and then cause damage to the converter. Therefore, this study proposes a coordinated DC - link voltage control (CDVC) scheme based on model predictive control (MPC), aiming to enhance the performance of DFIG wind turbines under HVRT conditions through the super - capacitor energy storage system (SESS) and prevent the DC - link over - voltage problem caused by grid voltage rise. The main contributions of the paper include: 1. Aiming at the magnitude of grid voltage rise, a two - stage CDVC control scheme is proposed to control wind turbines and SESS to mitigate DC - link over - voltage. 2. Voltage - dependent reactive current control (VRCC) is implemented to provide fast reactive current support by adjusting the reactive current reference value of offshore DFIG wind turbines without using a DC chopper. 3. An MPC - based SESS control scheme is formulated to regulate the active power output to mitigate the fluctuations of the DC - link, thereby enhancing the HVRT capability of offshore DFIG wind turbines. Through these measures, the study aims to improve the safe operation ability and stability of wind turbines when facing grid voltage rise.