Numerical modeling and performance evaluation of passive convergence-permeable reactive barrier (PC-PRB)

Kaixuan Zheng,Dong Xie,Yiqi Tan,Zhenjiang Zhuo,Tan Chen,Hongtao Wang,Ying Yuan,Junlong Huang,Tianwei Sun,Fangming Xu,Yuecen Dong,Ximing Liang

DOI: https://doi.org/10.1007/s11783-023-1731-z

IF: 6.048

2023-05-29

Frontiers of Environmental Science & Engineering

Abstract:The passive convergence-permeable reactive barrier (PC-PRB) was proposed to address the limitations of traditional PRB configurations. To evaluate the hydraulic and pollutant removal performance of the PC-PRB system, we developed a simulation code named PRB-Trans. This code uses the two-dimensional (2D) finite element method to simulate groundwater flow and solute transport. Case studies demonstrate that PC-PRB technology is more efficient and cost-effective than continuous permeable reactive barrier (C-PRB) in treating the same contaminated plume. Implementation of PC-PRB technology results in a 33.3% and 72.7% reduction in PRB length ( L PRB ) and height ( H PRB ), respectively, while increasing 2D horizontal and 2D vertical pollutant treatment efficiencies of PRB by 87.8% and 266.8%, respectively. In addition, the PC-PRB technology has the ability to homogenize the pollutant concentration and pollutant flux through the PRB system, which can mitigate the problems arising from uneven distribution of pollutants in the C-PRB to some extent. The L PRB required for PC-PRB decreases as the water pipe length ( L p ) increases, while the H PRB required initially decreases and then increases with increasing L p . The effect of passive well height ( H w ) on H PRB is not as significant as that of L p on H PRB . Overall, PC-PRB presents a promising and advantageous PRB configuration in the effective treatment of various types of contaminated plumes.

environmental sciences,engineering, environmental