A new extended finite element model for gas flow in shale gas reservoirs with complex fracture networks
Li Nan,Yang Kang,Kao Jiawei,Jiawei, Kao
DOI: https://doi.org/10.1007/s12517-023-11610-y
2023-08-05
Arabian Journal of Geosciences
Abstract:The key factors to the success of shale gas play are complex fracture network and stimulated reservoir volume (SRV) after the treatment of massive hydraulic fracturing. These two factors jointly determine the total contact area between the matrix system and the fracture system and therefore the productivity. To accurately model shale gas flow, researchers have been engaged in different ways to introduce complex fracture networks. The pattern of the main hydraulic fractures is mostly assumed to be separate, planar, and bi-wing, which forms a regular fracture network together with numerous secondary fractures. However, the main fractures are more likely to be bent, multi-branched, and intersected arbitrarily according to the micro-seismic data analysis and the fracture network propagation simulation and could be a complex and explicit fracture network themselves. The analytical methods are hard to analyze the complex irregular fracture network, and many numerical methods require the mesh to be aligned with the fractures. In addition, the stimulated reservoir volume is often overestimated to cover the whole shale reservoir which may be not as large as expected. To better simulate gas flow in the fractured shale, in this paper, the extended finite element method (XFEM) and the multi-branched enrichment scheme are adopted to address the influence of complex hydraulic fractures. The mass transfer equations were derived to describe the fluid exchange between complex hydraulic fractures and micro-scale fracture networks, so a separate pressure system can be used in the complex macro-scale fractures. Dual permeability model was used to simulate gas flow in the SRV and combines several mechanisms including gas adsorption/desorption, the Knudson flow, and the Darcy flow. In addition, a stress-sensitive formula was introduced to describe the effect of pressure changes of the fractures on permeability. By comparing with the results of the CMG simulator, the validity of this model is verified. The results show that the proposed model can better evaluate the impact of complex hydraulic fractures. The coverage area of SRV, the productivity, the Langmuir gas volume, and the pressure-dependent permeability of fractures all influence the bottom-hole pressure behavior greatly.
geosciences, multidisciplinary