Abstract:High-power impulse magnetron sputtering (HiPIMS), a new physical vapor deposition technique which combines the advantages of the high ionization rates of the sputtered materials and control of electromagnetism, has been widely used to deposit high-performance coatings with a large density and high adhesion. However, HiPIMS has some intrinsic disadvantages such as the low deposition rate, unstable discharge, and different ionization rates for different materials thereby hampering wider industrial adoption. We have recently designed an optimized cylindrical source based on the hollow cathode effect to circumvent the aforementioned limitations. However, during the operation of the cylindrical source, the discharge is inhomogeneous and the etching stripes are nonuniform. In order to determine the underlying mechanism and optimize the electromagnetic control, the discharge in the HiPIMS cylindrical source is simulated. The tangential magnetic field distribution on the target surface of the cylindrical sputtering source is inhomogeneous and electron runaway is serious, resulting in a relatively low plasma density. Two solutions are proposed to improve the situations. The first one is electrical improvement by installing an electron blocking plate, and the second one is magnetic improvement by adding compensating magnets. Our simulation results of the first method show that a potential well is produced by the electron blocking plate to suppress electron runaway and the plasma density is improved significantly, especially around the central cross-section of the cylindrical sputtering source. The discharge becomes homogeneous, and the etching stripes are uniform albeit not full enough. The second method of magnetic improvement significantly improves the homogeneity of the tangential magnetic field distribution on the target surface and the target utilization rate. After adding the optimized compensating magnets, the shape of the effective area (the value of the tangential magnetic field in a range of 25-50 mT) on the target surface can be controlled and made zonal. The target utilization rate increases to over 80% from 60%. In order to obtain the optimal conditions, the two techniques are combined. A larger and more homogeneous etching ring is observed by adopting both the electrical and magnetic improvements as predicted and explained by the simulation results. It can be concluded that the combination of the two improvement techniques can improve and optimize the HiPIMS cylindrical source.

Method for actively controlling surface electric potential of spacecraft

Research on High-Precision and Wide-Range Spacecraft Potential Measurement Method Based on Capacitive Voltage Division

A novel medium‐energy ion emitter for active spacecraft potential control

Surface engineering and on-site charge neutralization for the regulation of contact electrification

An Ion Soft-Landing Apparatus for Ion Transport Study with Surface Potential Measurement.

Spacecraft-charging Mitigation of a High-Power Electron Beam Emitted by a Magnetospheric Spacecraft

Study on the control of propellant flow by electric field in ionic liquid electrospray thruster

Electromagnetic Control and Optimization of High Power Impulse Magnetron Sputtering Discharges in Cylindrical Source

Tethered Capacitor Charge Mitigation in Electron Beam Experiments

Study and Elimination of the Cathode Etching on Large Beam-Anode Layer Ion Source

Theory of Power Generation From Spacecraft Charging

Dynamic evolution investigation on the dielectric surface charging under electron irradiation with various energy distributions

Plume neutralization of an ionic liquid electrospray thruster: better insights from particle-in-cell modelling

Phase Control on Surface for the Stabilization of High Energy Cathode Materials of Lithium Ion Batteries

Surface Charge Measurement under AC Voltage Using Active Electrostatic Probe and Controllable Phase Truncation Scheme

Studies on surface modification of materials by intense pulsed ion beams

A Current-Fed Resonant Plasma Source with Energy Compression Over Full Power Range

Broad Beam Ion Sources for Electrostatic Space Propulsion and Surface Modification Processes: From Roots to Present Applications

Significantly suppressing metal particle-induced surface charge accumulation of spacers in DC gas-insulated power transmission lines

In-situ lattice tuning of quasi-single-crystal surfaces for continuous electrochemical modulation

Universal droplet propulsion by dynamic surface-charge wetting