Abstract:Efficient heat dissipation has become the focus of electronic packaging materials, constructing three-dimensional thermally conductive filler networks to prepare composites can realize efficient heat transfer. However, there are few studies comparing the effects of different ways of constructing three-dimensional networks on the thermal conductivity enhancement of polymers. In this study, BNMS self-assembled from BNNSs was used as a thermally conductive filler, and the three-dimensional skeleton was constructed by both the powder mixing compression pressing method and the ice template method, and scanned to analyze the morphological and structural characteristics. At the same time, the epoxy composites were prepared, and the advantages and disadvantages of the thermal conductivity of the composites prepared in different ways were analyzed by combining the SEM structures. In the powder hybrid compression pressing method, the in-plane and through-plane thermal conductivity of the epoxy composites with the BNMS additive amount of 53.92 wt% reached 10.961 W·m −1 ·K −1 and 9.955 W·m −1 ·K −1 , respectively, which was increased by 58 and 52 times. The thermal stability has been improved significantly that the T 60 was in creased by 60.89 °C compared to pure epoxy. Using the ice template method with 7.67 wt% of BNMS addition, the through-plane thermal conductivity of the epoxy composites reaches 0.977 W·m −1 ·K −1 , which is an improvement of 428.1 % compared with pure EP. In addition, both composites maintain low dielectric constants and dielectric losses. It is instructive for the preparation method of subsequent construction of three-dimensional thermally conductive filler networks.

Thermal Conductive Network Construction and Enhanced Thermal Conductivity in Mica Tape Composites for Large Generator Insulation

Fabrication of Three-dimensional Thermally Conductive Carbon Fibers/Carbon Nanotubes Network Reinforce Epoxy Composites

Enhanced thermal conductivity and insulation properties of mica tape with BN coating via electrostatic spraying technology

Preparation and properties of MWCNTs-BNNSs/epoxy composites with high thermal conductivity and low dielectric loss

Study on Thermal Conductivity of BNNs/Mg(OH)2/LDPE Composites Based on Melt Blending Method

Highly Thermally Conductive Flexible Insulated PI/BNNS@rGO Nanocomposite Paper with a Three-Dimensional Network Bridge Structure

High thermal conductivity electrical insulation composite EP/h‐BN obtained by DC electric field induction

Large-Area, Highly Thermally Conductive, but Electrically Insulative Industrial Aramid Papers with Hierarchical Multiscale Compositing Structures

Constructing 3D cross-connected networks in spongy MgO/Ni/MWCNT composites to synchronously boost microwave absorption and thermal conductivity

Enhance the thermal conductivity and maintain insulation property of epoxy via constructing a three-dimensional network by doping hexagonal boron nitride and carbon nanofiber

Electrically insulating thermal interface material with ultrahigh thermal conductivity enabled by vertical boron nitride fibers

Dielectric thermally conductive boron nitride/silica@MWCNTs/polyvinylidene fluoride composites via a combined electrospinning and hot press method

Bi-directional High Thermal Conductive Epoxy Composites with Radially Aligned Boron Nitride Nanosheets Lamellae

Design of Efficient Microstructured Path by Magnetic Orientation Boron Nitride Nanosheets/mnfe2o4 Enabling Waterborne Polyurethane with High Thermal Conductivity and Flame Retardancy

Epoxy composite with significantly improved thermal conductivity by constructing a vertically aligned three-dimensional network of silicon carbide nanowires/ boron nitride nanosheets

Construction of three-dimensional network using boron nitride microspheres and the thermal conductivity/stability of epoxy resin composites

Preparation of Three-Dimensional Interconnected Graphene/ionic Liquid Composites to Enhanced Thermal Conductivities for Battery Thermal Management

Thermal Conductive Networks Constructed by Sialon Fibers in-Situ Synthesized in Barium Aluminosilicate Glass-Ceramic

Layer‐by‐Layer Assembled G‐c3n4 Nanosheets/Cellulose Nanofibers Oriented Membrane‐Filler Leading to Enhanced Thermal Conductivity

Thermally conductive epoxy composites with efficient heat transfer pathways by in-situ growth of CNTs on oriented BNNS

Constructing Heterostructured MWCNT-BN Hybrid Fillers in Electrospun TPU Films to Achieve Superior Thermal Conductivity and Electrical Insulation Properties