Abstract:Objective: Employ a novel testing method to assess Multi Directional Impact Protection System (MIPS) helmet technology on rotational velocity and acceleration during head impact. Methods: An optimization study was completed utilizing a 50th percentile male Hybrid III anthropomorphic test device (ATD). Helmets included expanded polystyrene foam (EPS) and two different MIPS helmets (MIPS 1, MIPS 2). A 24.38-m-long elevated track with rails and a motorized sled was utilized to replicate a fall from approximately 2.13 m. The sled was set to a speed of 20.92 kph, where a tripping mechanism induced rotation in the ATD from the sled and onto a sand surface. During impact of the ATD with the sand surface, head kinematics were measured using resultant acceleration (peak G's), duration of impact (ms), and rotational velocity (rad/s). Results: A total of three trials for each helmet did not demonstrate a significant difference between the EPS vs. MIPS 1 group with, peak (G's) for resultant acceleration (p = 0.100), duration (ms) for resultant acceleration, (p = 0.100), peak (G's) for rotational velocity, (p = 0.700), and duration (ms) for rotational velocity (p = 0.700). Similarly, the EPS vs. MIPS 2 testing demonstrated no significant differences between the MIPS 2 helmet compared to the EPS helmet, with resultant acceleration (p = 0.400), duration acceleration (p = 0.200), rotational velocity (p = 0.400) and duration velocity (p = 0.400). However, when the MIPS helmet data were pooled, and the EPS helmet data were compared, a statistically significant difference in the duration of acceleration was found (p = 0.048). Conclusions: Current testing uses a helmeted head form which is dropped or rolled from a prescribed height. These methods discount the loading placed on the neck and head through the angular momentum of the body. Our novel testing method did not find significant differences between the helmet types in diminishing peak rotational forces to the brain; however, our data suggests that MIPS helmet liners may reduce duration of impact. The reduction of acceleration duration could indicate less rotation of the neck, due to the dampening of these forces by the MIPS liners.

Numerical study on energy absorption performance of novel bionic helmet liner

Research Progress on Helmet Liner Materials and Structural Applications

A comparative analysis of 3D woven honeycomb-based aircrew helmet liners against Nomex and Aluminum alternatives

A novel bio-inspired helmet with auxetic lattice liners for mitigating traumatic brain injury

Design Engineering of High-Energy Absorbent Aircrew Helmet Using 3D Woven Structural Composite

Parameter optimization design of the helmet liner structure for mitigating traumatic brain injury under impact loading

Energy Absorption Performance of Bionic Multi-cell Tubes Inspired by Shrimp chela

Incorporating neck biomechanics in helmet testing: Evaluation of commercially available WaveCel helmets

The Designs and Testing of Biodegradable Energy-Absorbing Inserts for Enhanced Crashworthiness in Sports Helmets

A novel equestrian helmet testing method: helmet liner performance in highly realistic simulation

A Computational Analysis of the High-velocity Impact Performance of Lightweight 3D Hybrid Composite Armors

Numerical study on energy absorption characteristics of bio-mimetic multi-cell thin-walled structures with different hierarchy

Study on the Mechanical Properties of Bionic Protection and Self-Recovery Structures

Low velocity impact behavior of bioinspired hierarchical armor with filling layer

Energy Absorption Characteristic of Biomimetic Gradient Hierarchical Multicellular Tubes Under Axial Impact

New design and energy absorption characteristic study of bionic beetle's elytra under axial compression

Biomimetic design and impact simulation of Al2O3/Al composite armor based on armadillo shell

A numerical investigation of energy dissipation mechanism of visco-hyperelastic bimaterials subjected to low-velocity impact

Recent bicycle helmet designs and directions for future research: A comprehensive review from material and structural mechanics aspects

Study on the crashworthiness of bio-inspired multi-cell tube under axial impact

Study of Impact Resistance Based on Porcupine Quills Bionic Thin-walled Structure