Abstract:A series of 19 beam specimens , with varying stirrup spacing and tensile lap splice lengths, were tested at the National Institute of Standards and Technology (NIST) under four-point loading to investigate the impact of alkali silica reaction (ASR) on the flexural strength and bond behavior of reinforced concrete members. The beams contained highly reactive aggregates, were cured in an environmental chamber at high relative humidity and temperature, and were tested in batches at regular intervals in time. The development of strains in the deformed bar reinforcement was monitored in five beam specimens to provide an assessment of the level of ASR expansion achieved prior to testing. The strain development in the tensile reinforcement bars and stirrups was generally similar between the specimens, despite differences in stirrup spacing and lap splice length. Strains in the transverse stirrups due to ASR-induced expansion at the time of testing were roughly twice the strains recorded in the longitudinal tensile reinforcement, reaching a maximum value of approximately 0.002 mm/mm prior to testing. The concrete mixture studied exhibited expansions in the range of 0.2% and the tested beams exhibited randomly oriented surface cracking with no localized spalling or general loss of section at the time of testing. The effects of ASR included reductions in the compressive strength and modulus of companion cylinders of up to 15% and 50%, respectively. A rigorous statistical analysis of the measured data was performed to quantify the influence of ASR-induced expansion, splice length, and stirrup spacing on the beams' flexural capacity and the maximum achieved average bond strength. Results indicated that in the range of expansions, stirrup spacings, and lap splice lengths studied, there was no evidence that the moment capacity or the maximum average bond strength was reduced by the effects of ASR. Tested beams constructed with ACI 318 code compliant splice lengths achieved or exceeded the nominal flexural strength of the section, regardless of the degree of ASR-induced expansion observed.

Low tensile strength in older concrete structures with alkali-silica reaction

Comparison of Field Observations with Laboratory Test Results on Concretes Undergoing Alkali-Silica Reaction

Effect of alkali silica reaction on pretensioned concrete bridge girders

Structural assessment of an ASR-affected reinforced concrete bridge

Alkali-silica reaction (ASR) in concrete structures: Mechanisms, effects and evaluation test methods adopted in the United States Case Studies in Construction Materials

Effect of alkali-silica reaction on the flexural behavior of beams with tensile lap splices

Challenges related to structural modelling and assessment of concrete structures affected by alkali-silica reactions

Experimental investigation of ASR-affected concrete – The influence of uniaxial loading on the evolution of mechanical properties, expansion and damage indices

Mechanical Properties of ASR-Affected Concrete Containing Fine or Coarse Reactive Aggregates

Monitoring of reinforced concrete structures affected by alkali-silica reaction

Failure criteria and microstructure evolution mechanism of the alkali–silica reaction of concrete

Strength and Deformation Properties of Alkali-Silica Reaction (ASR) Damaged Concrete Exposed to External Alkalis

THE STRUCTURAL PERFORMANCE OF CONCRETE AFFECTED BY ALKALI-SILICA REACTION

Case Studies on Deterioration of Concrete Structures due to Alkali-Silica Reaction (ASR) and its Recent Rehabilitation Techniques

Microscopic investigation of building materials affected by alkali-silica reaction

BOND STRENGTH OF REINFORCEMENT IN CONCRETE AFFECTED BY ALKALI SILICA REACTION

Relation of ASR-induced expansion and compressive strength of concrete

A study into the alkali-silica reactivity of recycled concrete aggregates and the role of the extent of damage in the source structures: Evaluation, accelerated testing, and preventive measures

Effect of ASR related expansion in the concrete due to alkali concentration and total amount of alkali

Multiaxial restraint of steel fibres in ASR-affected fibre reinforced concrete

INVESTIGATION OF FACTORS INFLUENCING THE EXPANSIVE BEHAVIOUR, COMPRESSIVE STRENGTH AND MODULUS OF RUPTURE OF ALKALI-SILICA REACTIVE CONCRETE USING LABORATORY CONCRETE MIXES