Abstract:It is important to characterize the composition of aerosol particles in air, which causes adverse health effects and millions of deaths each year. Aerosol, or particulate matter (PM), is difficult to characterize because of its wide range of particle sizes; constituents (various organic and inorganic compounds); concentration; morphology; state (liquid or solid); and time-dependent modification. Infrared (IR) spectroscopy is a non-destructive method, which provides useful chemical information about the constituents. Current methods for collecting samples use filters that are made of materials which interferes with the IR spectra and thus lowers detection capabilities. Hence, collection on an IR-transparent substrate is desirable. In order to make a good quantitative measurement of the composition of the aerosol using IR-spectroscopy, a collector design should achieve some objectives. Low size-dependence, low chemical interference, and high collection efficiency are required to collect an aerosol sample that is identical to the aerosol in air. Furthermore, high spatial uniformity in deposition pattern is required to reduce optical artefacts or spectrometer dependence, and high collection mass flux is required to reduce the collection time needed for making a confident claim. Electrostatic precipitation (ESP) is a versatile method of aerosol collection and does not suffer from high pressure drop (which can modify the aerosol chemical composition, for example in filtration), or from bounce-off effects (which preferentially samples the size range and liquids, for example in impaction). ESP devices for particle deposition are present in either a translationally symmetric design (linear system) or a radially symmetric design (radial system). Most ESP designs in the public domain have been designed for different purposes and face limitations for fulfilling objectives stated above. Hence, a new device is necessary to meet performance objectives. Our design is based on an analytical, dimensionless (scalable) mathematical model that embodies the physics of particle migration trajectories due to fluid dynamics and electrostatics that lead to particle capture in a two-stage ESP device. This model allowed us to evaluate the tradeoffs among objectives to arrive at a design optimized across multiple objectives, and across multiple length scales (due to its dimensionless form). We validated this model against numerical simulations using COMSOL Multiphysics software, which is considered to be accurate but can only be run for a limited number of configurations (with respect to geometry and operating parameters) due to its high computational cost. Using the validated analytical model, we investigate the relationship among device geometry, methods of particle introduction, operational parameters, and deposited particle positions (which determines collection efficiency, uniformity, and size dependence), to arrive at a range of designs that meet design criteria. We further report the fabrication of a suitable embodiment using 3D-printing while incorporating ease of operation and handling. Measurement capabilities and limits of the device using different laboratory-generated aerosol are reported.

What do spore particles look like - use of real-time measurements and holography imaging to view spore particles from four bioaerosol generators

Size-Resolved Single-Particle Fluorescence Spectrometer for Real-Time Analysis of Bioaerosols: Laboratory Evaluation and Atmospheric Measurements

Design and performance of a single-pass bubbling bioaerosol generator

Analysis of Culturable Bacterial and Fungal Aerosol Diversity Obtained Using Different Samplers and Culturing Methods

A novel laminar-flow-based bioaerosol test system to determine biological sampling efficiencies of bioaerosol samplers

Morphology, Mixing State, and Hygroscopicity of Primary Biological Aerosol Particles from a Chinese Boreal Forest

Technical Note: Characterization of a Single-Beam Gradient Force Aerosol Optical Tweezer for Droplet Trapping, Phase Transition Monitoring, and Morphology Studies

Real-time pollen identification using holographic imaging and fluorescence measurements

Analysis of Portable Impactor Performance for Enumeration of Viable Bioaerosols

Method and apparatus for quantitative measurement of aerosol composition using controlled collection of airborne particles

A comparison of real-world outdoor aging of Bacillus thuringiensis bioaerosols using Goldberg rotating drums and synthetic spider webs in Conroe, Texas

Comprehensive performance evaluation of six bioaerosol samplers based on an aerosol wind tunnel

Physical and chemical characterization of urban aerosol particles through Soot Particle Aerosol Mass Spectrometry

Monitoring of Bioaerosol Inhalation Risks in Different Environments Using a Six-Stage Andersen Sampler and the PCR-DGGE Method

Concentrations of bacteria and bacterial and fungal spores calculated from chemical tracers associated with size-segregated aerosol in a composting plant

Review: The Use of Real-Time Fluorescence Instrumentation to Monitor Ambient Primary Biological Aerosol Particles (PBAP)

Airborne Microbial Aerosol Detection by Combining Single Particle Mass Spectrometry and a Fluorescent Aerosol Particle Sizer

Polymerase chain reaction analysis of laboratory generated bioaerosols

Study on quantitative generation technology of bio-fluorescence calibration particles based on inkjet generator

Detection of Micrometer-Sized Virus Aerosols by Using a Real-Time Bioaerosol Monitoring System

150 Keynote: A New Aerosol Mass-Spectrometer for Simultaneous Detection of Health-Relevant Polycyclic Aromatic Hydrocarbons, Soot and Inorganic Components from Individual Airborne Particles