Abstract:The development of friction stir welding (FSW) created the basic foundation for friction stir processing (FSP). This process entails refining the local microstructure and achieving the localised plastic deformation due to the stirring effect of the tool, which may involve adding additional filler material as required. The rotating tool involved in the process has a shoulder and pin responsible for heat generation for plastic deformation and localised mixing. The rotating tool is inserted and traversed on the desired surface, tailoring the material properties. The tool's exposure to the surface causes localised plastic deformation and thermal gradient, and microstructural changes occur locally. The present investigation uses Friction Stir Processing (FSP) to fabricate an aluminium metal matrix composite. Recently, the use of aluminium alloy has been replaced by composites because of their increased mechanical and physical properties (specific properties). The experiment leads to manufacturing an aluminium metal matrix composite using aluminium oxide, boron carbide and commercially pure copper dust. Later, the effect of heat treatment on the respective metal matrix composite is studied. A comparative study among three different types of FSP techniques viz. FSP, Reinforced FSP, and Heat-treated Reinforced FSP have been performed. The tool revolution speed (RPM) and tool traverse speed of 400 RPM and 10 mm/min had been implemented, respectively. The T4 Heat-Treatment cycle was used during the current investigation. This investigative study was performed to analyse the changes in grain sizes and hardness values at the stir zone (SZ), thermo-mechanically affected zone (TMAZ), heat affected zone (HAZ) and on the base materials (BM) of the samples. The reinforced FSP metal matrix composite (MMC) showed an 81.26% increase in the micro-hardness value (HV) compared to the base metal. Further on analysing the microstructures, the reinforced FSP composite showed a 65.20% reduction in grain size. Moreover, the Heat-Treated sample showed an increase in the micro-hardness value by 99.8%.

A Comprehensive Review on the Impact of Reinforced Nanoparticles in Friction Stir Welded Aluminium Alloys: An Analysis of Process Parameters and Mechanical Properties

Enhancement of microstructure and mechanical properties of similar and dissimilar aluminium alloy by friction stir welding/processing using nanoparticles: a review

Experimental Review on Friction Stir Welding of Aluminium Alloys with Nanoparticles

Effect of nano-Sized Al2O3 Particles on Microstructure and Mechanical Properties of Aluminum Matrix Composite Fabricated by Multipass FSW

Nanoparticles Reinforced Joints Produced using Friction Stir Welding: A Review

A comprehensive review on the effect of precipitation on mechanical properties of friction stir welded aluminium alloys

Recent Advances in Friction Stir Welding/Processing of Aluminum Alloys: Microstructural Evolution and Mechanical Properties

Applications of reinforcement particles in the fabrication of Aluminium Metal Matrix Composites by Friction Stir Processing - A Review

Fundamentals and review on material science, control theory and parametric inter-dependencies during friction stir welding of aluminium metal matrix composites

Influence of friction stir processing on microstructure and mechanical properties of AA6061 reinforced with Zr and Ni metallic particles

Influence of Tool Pin Profiles on Aluminium Alloy A356 and Ceramic-Based Nanocomposites for Light Weight Structures by Friction Stir Processing

A review on nanomaterials reinforcement in friction stir welding

Advancements in Aluminum-Based Composite Manufacturing: Leveraging ZrO2 Reinforcement through Friction Stir Process

A Critical review on the performance and microstructural characteristics of materials fabricated through friction stir additive methods and deposition techniques

Comparative study of microstructural evolution and mechanical properties in friction stir processed, reinforced friction stir processed, and heat-treated reinforced friction stir processed Al composites

Effects of friction stir processing parameters on the wear resistance and mechanical properties of fabricated metal matrix nanocomposites (MMNCs) surface

Effect of nanoparticle reinforcement and cryogenic treatment on aluminum alloys for enhancement of mechanical and microstructural characteristics-a review

Optimizing Friction Stir Welding of Dissimilar Grades of Aluminum Alloy Using WASPAS

Effect of Nano Particle Deposition on Mechanical Properties of Friction Stir Welded Dissimilar Aluminium Alloys by Taguchi Technique

Experimental investigation and optimization of mechanical properties on combination of higher and lower strength of aluminum alloys

Enhancing Aluminum-Based Composite Manufacturing: Leveraging ZrB2 Reinforcement via Friction Stir Process