Performance Evaluation of Different Chitosan-Clay Composite Materials for Efficient Harvesting of Chlorella Vulgaris and Impacts on Downstream Bioproduct Processing and Water Reusability
Zhihong Yin,Shuangxi Li,Dan Hu,Zhuo Li,Ruoyu Chu,Chenchen Liu,Xinzhu Li,Jiangjun Hu,Liandong Zhu
DOI: https://doi.org/10.1016/j.cej.2021.132892
IF: 15.1
2022-01-01
Chemical Engineering Journal
Abstract:As an environmentally friendly bioflocculant, chitosan has a great application potential in the field of microalgae harvesting due to its biocompatibility. In this work, three different inorganic clay minerals (kaolin, montmorillonite, and diatomite) were selected to prepare chitosan-clay composite materials (CTS/KAL, CTS/MML and CTS/DTE) as flocculants to harvest microalgae cells. The harvesting capacities of CTS/KAL, CTS/MML and CTS/ DTE were accordingly 97.37%, 97.81% and 98.34% for microalgae cells under the dosage of 60 mg/L, micro algae concentration of 0.923 g/L, settling time of 30 min and pH of 10. CTS/DTE showed excellent harvesting performance for microalgae cells, mainly due to the enhancement of charge neutralization, sweeping and bridging effects. Based on the phenomenological theory, the second-order polynomial model was used to analyze the influences of different external factors on the microalgae harvesting efficiency. A reasonable performance relationship between CTS-clays for harvesting of microalgae cells and external factors was established. The analysis of carbohydrates, proteins, and fatty acids of microalgae biomass collected by CTS/KAL, CTS/MML, CTS/DTE and centrifugation showed that the harvesting of CTS-clay did not influence the properties of biomass. The experimental results of water resource recycling and re-cultivation after microalgae harvesting by CTS/KAL, CTS/MML and CTS/DTE exhibited that the growth rates of 50% circulating medium + 50% fresh BG11 culture medium were accordingly 2.512, 2.466 and 2.572 times higher than those of 100% circulating medium. It is concluded that chitosan-clay composite materials are efficient and environmentally friendly flocculants with a great applicable potential in microalgae harvesting.