Abstract:Sensitive H-2 gas sensors are highly desirable for the prediction and early-warning of H-2 leakage. Low-dimensional nanostructures of metal oxide semiconductor emerge as promising materials candidates, but it remains a challenge to preserve the nanostructures in the real sensors. In this work, we demonstrated highly sensitive H-2 gas sensors based on porous network of SnO2 nanowires that exhibited ultrasmall diameter similar to 2 nm. Colloidal SnO2 nanowires synthesized via a solvothermal process were drop-coated onto the commercial alumina substrates, followed by in-situ annealing treatment at 350 degrees C to remove the surface ligands. The sensors exhibited sensitive response with linear dependence on the H-2 gas concentration ranging from 2 ppm to 100 ppm when operated at 250 degrees C. Typically, the sensor had a response of 13 toward 40 ppm of H-2, with the response and recovery time being 15 s and 31 s, respectively. To further improve the sensor performance, Palladium doped SnO2 nanowires were thoroughly investigated. It's shown that, the operating temperature of the sensor decreased from 250 degrees C to 150 degrees C after Pd doping, and the response and recovery time decreased to 6 s/3 s. The superb sensitivity was attributed to the enhanced gas reception, electron transport as well as utility factor owing to the network nanostructure of ultrathin SnO2 nanowires and catalytic activity of Pd, according to theoretical calculation and adsorption kinetics studies. Combined with the excellent solution processability, the colloidal SnO2 nanowires are potentially attractive for next-generation gas sensors with lower power consumption and integration with silicon-based substrates.

Construction of hierarchical ZnO flower-like structure for boost H 2 S detection at low temperature

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

Nanosheet assembled NiO-doped-ZnO flower-like sensors for highly sensitive hydrogen sulfide gas detection

Hierarchical highly ordered SnO2 nanobowl branched ZnO nanowires for ultrasensitive and selective hydrogen sulfide gas sensing

Hierarchical highly ordered SnO 2 nanobowl branched ZnO nanowires for ultrasensitive and selective hydrogen sulfide gas sensing

Gas-sensing Property Improvement of ZnO by Hierarchical Flower-Like Architectures

Synthesis of ZnO/ZnCo2O4 hollow tube clusters by a template method for high-sensitive H2S sensor

Enhanced performance of the tangerines-like CuO-based gas sensor using ZnO nanowire arrays

ZnO@CuO hollow nanospheres based composites used for sensitive detection of hydrogen sulfide with long-term stability

Sedum lineare flower-like ordered mesoporous In2O3/ZnO gas sensing materials with high sensitive response to H2S at room temperature prepared by self-assembled of 2D nanosheets

Ultra-sensitive H 2 S sensor based on sunflower-like In-doped ZnO with enriched oxygen vacancies

Fabrication of in-situ grown and Pt-decorated ZnO nanoclusters on new-type FTO electrode for room-temperature detection of low-concentration H2S

ZnO-CuO Hollow Nanocages Derived from Metal–Organic Frameworks for Selective H 2 S Sensing

ZnO-CuO Hollow Nanocages Derived from Metal–Organic Frameworks for Selective H2S Sensing

The preparation of MOFs-derived ZnO/Co3O4 nanocages and its sensing performance to H2S

Hierarchical Nb2O5@ZnO Hetero-Branched Nanorods for Enhanced H2S Gas Sensing

Hierarchically Porous ZnO with High Sensitivity and Selectivity to H2S Derived from Biotemplates

Fabrication of Lettuce-Like ZnO Gas Sensor with Enhanced H2S Gas Sensitivity

Hydrogen gas sensor based on SnO<sub>2</sub> nanospheres modified with Sb<sub>2</sub>O<sub>3</sub> prepared by one-step solvothermal route

An olive-shaped SnO2 nanocrystal-based low concentration H2S gas sensor with high sensitivity and selectivity

Low-Cost and High-Performance ZnO Nanoclusters Gas Sensor Based on New-Type FTO Electrode for the Low-Concentration H₂S Gas Detection