Abstract:Metallic phase change material (PCM)/ceramic composites have emerged as promising candidates for medium and high-temperature thermal energy storage (TES) due to their excellent performance. However, challenges associated with leakage and oxidation in metals, along with the limited thermal conductivity of ceramic matrices, restrict further performance enhancement. Herein, an alloy microencapsulated phase change material (MEPCM) is prepared as a PCM using the “double-layer coating, sacrificial inner layer” method, followed by compounding it with a ceramic matrix and industrial graphene (IG). Based on this, a novel IG/SnBi58 MEPCM/ceramic composite is prepared and its performances are investigated. The results show that the composite with 12 wt% IG exhibits optimum performance: a thermal conductivity of 5.75 W/(m·K), 86.1% higher than without IG, melting enthalpy of 73.71 J/cm3, and compressive strength of 49.38 MPa. Furthermore, the microencapsulation of alloys fundamentally solves the PCM leakage issue within the composite and enables its good component compatibility. The heat storage density reaches 399.1 MJ/m3, over 2.3 times that of traditional quartz sensible heat storage materials. Owing to the thermally expanded cavities created by “double-layer coating, sacrificial inner layer” method, the prepared MEPCM demonstrates high thermal reliability, so the composite maintains stable thermal properties and chemical structure after 500 thermal cycles. Finally, the comparative analysis reveals that the composite combines higher thermal conductivity, compressive strength, heat storage density, and thermal cycle stability than other composite heat storage materials. This work provides a new strategy to meet the demand for high-performance heat storage materials in medium-temperature TES applications.

Record high thermoelectric performance of expanded graphite/carbon fiber cement composites enhanced by ionic liquid 1-butyl-3-methylimidazolium bromide for building energy harvesting

Significant Improvement in Thermoelectric Properties of Carbon-Reinforced Cementitious Composites Achieved by Regulating the Graphitization Degree of Expanded Graphite

Enhanced thermoelectric performance of low carbon cement-based composites by reduced graphene oxide

Remarkable high-temperature ionic thermoelectric performance induced by graphene in gels thermocells

Synergistic optimization of thermoelectric performance in cementitious composites by lithium carbonate and carbon nanotubes

Quasi-industrially Produced Large-Area Microscale Graphene Flakes Assembled Film with Extremely High Thermoelectric Power Factor

Large-scale fabrication of expanded graphite aerogel-based phase change material composite for efficient solar harvesting

Improved thermoelectric properties of graphene reinforced multiphase cement composites: experiments and modeling

Ultrafast and Cost-Effective Fabrication of High-Performance Carbon-Based Flexible Thermoelectric Hybrid Films and Their Devices

Construction of new conductive networks for expandable graphite-based cement composites via a facile heat treatment process

Thermal performance of galactitol/mannitol eutectic mixture/expanded graphite composite as phase change material for thermal energy harvesting

Preparation of Three-Dimensional Interconnected Graphene/ionic Liquid Composites to Enhanced Thermal Conductivities for Battery Thermal Management

Thermal performance enhancement of high durability alloy microencapsulated phase change material (MEPCM)/ceramic composites based on industrial graphene

Boosting power factor of thermoelectric cementitious composites by a unique CNT pretreatment process with low carbon content

Electro- and photo-thermal energy conversion investigation of polyethylene glycol infiltrated porous carbon aerogels

Mixed “Ionic-Electronic” Thermoelectric Effect of Reduced Graphene Oxide Reinforced Cement-Based Composites

Enhancement of Thermo-Physical Properties of Expanded Vermiculite-Based Organic Composite Phase Change Materials for Improving the Thermal Energy Storage Efficiency

Enhancing the thermoelectric characteristics of thermoelectric cement matrix composites by (Ca0.87Ag0.1La0.03)3Co4O9 binary metal oxide

Significant Enhancement in the Thermoelectric Properties of Ionogels through Solid Network Engineering

Thermal and Mechanical Properties of Expanded Graphite/Paraffin Gypsum-Based Composite Material Reinforced by Carbon Fiber

Ti3C2Tx MXene/Graphene Hybrid Frameworks for Constructing Thermally Conductive Phase Change Composites with Solar-Thermal Conversion Ability