Abstract:The enhancement in selectivity of nanofiltration (NF) membranes is of great significance for extending the application areas and improving the process economy, especially for the separation of monovalent/divalent ions. The characteristics of moderately increased pore size, fewer nonselective defects and a more uniform structure are conducive to NF membrane exhibiting higher rejection of divalent ions but lower rejection of monovalent ions. Nonylphenol polyoxyethylene ether (NP-10) was introduced in interfacial polymerization process in this study to optimize the microstructure and surface properties of polyamide (PA) layer to manufacture highly selective NF membranes. The hydrophobic benzene ring and aliphatic chain in NP-10 could form a local space that restricted the interfacial polymerization reaction on the side of the oil phase, thereby appropriately increasing the pore size of the PA layer. It was advantageous to the permeation of water molecules and monovalent ions with a smaller radius. The long hydrophilic oxyethylene group as a guide could facilitate the uniform diffusion of the monomer to the water/hexane interface. NP-10 as an amphiphilic substance would form a self-assembled network at the water/hexane interface, which was expected to optimize the distribution of aqueous amine monomers at the phase interface. Meanwhile, introducing NP-10 can form a stable interface and reduce the interface disturbance, thus inhibiting the formation of non-selective macropores (or “defects”) in PA layer, which could improve the separation selectivity of monovalent/divalent ions. In addition, the hydrophilicity and electronegativity were also enhanced. The results showed that the MWCO of NF membrane increased from 210.1 Da (TFC-0) to 269.6 Da (TFC-0.25), and the average pore radius increased from 0.248 nm to 0.276 nm. The water flux of optimized membrane was doubled compared to the control membrane. Most important, the optimized exhibited higher rejection of divalent Na2SO4 (from 98.07% to 99.43%), and meanwhile lower rejection of monovalent NaCl (from 54.07% to 27.52%). NaCl/Na2SO4 separation factor reached up to 130.53, which was about four times of TFC-0 membrane.

Tailoring the pore size distribution of nanofiltration membranes via surfactants with different alkyl chain lengths: Towards efficient molecular separation

Tailoring Pore Size of Positively-Charged Nanofiltration Membrane Via a Facile Self-Assembly Method

Aminated Substrate Based Thin Film Composite Nanofiltration Membrane with High Separation Performance by Chemically Inhibiting the Intrusion of Polyamide

Tailoring the Selectivity of Quasi-Pims Nanofiltration Membrane Via Molecular Flexibility of Acyl Chloride Monomers for Desalination from Dye Effluents

Hydrophilic Modified Polydopamine Tailored Heterogeneous Polyamide in Thin-Film Nanocomposite Membranes for Enhanced Separation Performance and Anti-Fouling Properties

Amphiphilic Interlayer Regulated Interfacial Polymerization for Constructing Polyamide Nanofiltration Membranes with High Perm-Selectivity of Mono-/Divalent Salts

Pore Size Tailoring from Ultrafiltration to Nanofiltration with PVC-g-PDMA Via Rapid Immersion Thermal Annealing

Tuning the nano-porosity and nano-morphology of nano-filtration (NF) membranes: Divalent metal nitrates modulated inter-facial polymerization

Preparation of highly selective nanofiltration membranes by moderately increasing pore size and optimizing microstructure of polyamide layer

Toward Enhancing Desalination and Heavy Metal Removal of TFC Nanofiltration Membranes: A Cost-Effective Interface Temperature-Regulated Interfacial Polymerization

Polyarylester thin films with narrowed pore size distribution via metal-phenolic network modulated interfacial polymerization for precise separation

Molecular Design of the Polyamide Layer Structure of Nanofiltration Membranes by Sacrificing Hydrolyzable Groups Toward Enhanced Separation Performance.

In-situ Interfacial Polymerization of Polyamide TFN Membranes by Adding a Diamino-Silane Coupling Agent: Toward Enhanced Desalination Performance

Tailoring morphology for improved dispersibility of hydrophilic silica nanoparticles to fabricate thin-film nanocomposite membranes

Hydrogel-regulated interfacial polymerization: A gateway to effective nanostructure tuning of polyamide nanofiltration membranes

Polyamide nanofiltration membrane with high mono/divalent salt selectivity via pre-diffusion interfacial polymerization

Interfacial assembly of polyamide nanofilm membranes regulated by surfactants with different structural characteristics

Exploitation of Amine Groups Cooped up in Polyamide Nanofiltration Membranes to Achieve High Rejection of Micropollutants and High Permeance of Divalent Cations

Simultaneously Modulating Nanofiltration Membrane Surface Charges and Pore Size in Pursuit of Effective Cation Separation Via a Bi-Functional Monomers-Interfered IP Reaction

Tailoring ultrathin microporous polyamide films with rapid solvent transport by molecular layer-by-layer deposition

Hexane Treatment to Facilely Tailor Polyamide Nanofiltration Membrane Performance: the Critical Role of Treatment Duration