Abstract:Multi‐scale investigations aided by the discrete element method (DEM) play a vital role for current state‐of‐the‐art research on the elementary behaviour of granular materials. Similar to laboratory tests, there are three important aspects to be considered carefully, which are the proper stress/strain definition and measurement, the application of target loading paths and the designed experiment setup, to be addressed in the present paper. Considering the volume sensitive characteristics of granular materials, in the proposed technique, the deformation of the tested specimen is controlled and measured by deformation gradient tensor involving both the undeformed configuration and the current configuration. Definitions of Biot strain and Cauchy stress are adopted. The expressions of them in terms of contact forces and particle displacements, respectively, are derived. The boundary of the tested specimen consists of rigid massless planar units. It is suggested that the representative element uses a convex polyhedral (polygonal) shape to minimize possible boundary arching effects. General loading paths are described by directly specifying the changes in the stress/strain invariants or directions. Loading can be applied in the strain‐controlled mode by specifying the translations and rotations of the boundary units, or in the stress‐controlled mode by using a servo‐control mechanism, or in the combination of the two methods to realize mixed boundary conditions. Taking the simulation results as the natural consequences originated from a complex system, virtual experiments provide particle‐scale information database to conduct multi‐scale investigations for better understanding in granular material behaviours and possible development of the constitutive theories provided the qualitative similarity between the simulation results from virtual experiments and observations on real material behaviour. Copyright © 2011 John Wiley & Sons, Ltd.

Simulation of granular crystallization of cubic particles in twisting container using discrete element method

Numerical Simulations of Granular Material Behavior under Rotation of Principal Stresses: Micromechanical Observation and Energy Consideration

Discrete Element Modeling of Polyhedral Representation of Granular Materials

Dynamic Densification of Wet Granular Materials in Continuous Dense Flows under Gravity

Discrete Element Method Simulation on the Immigration of Granular Matter in a Vertically Vibrating U-Tube

Dynamic modelling on the confined crystallization of mono-sized cubic particles under mechanical vibration

Discrete Element Method Simulations for Complex Granular Flows

An Experimentally Validated Coarse-Grain DEM Study of Monodisperse Granular Mixing

Computational Granular Dynamics Simulation of Unsteady Movement in Particle Moving Bed

DEM/CFD Modelling of the Deposition of Dilute Granular Systems in a Vertical Container

On the Influence of Inter-Particle Friction and Dilatancy in Granular Materials: a Numerical Analysis

A virtual experiment technique on the elementary behaviour of granular materials with discrete element method

Granular Damping Analysis Using a Direct Simulation Monte Carlo Approach

Flow-induced surface crystallization of granular particles in cylindrical confinement

Three-Dimensional DEM Analysis of Granular Flows Under Different Gravity Levels in Rotating Cylinders

Damping behaviors of granular particles in a vertically vibrated closed container

Effects of angularity and content of coarse particles on the mechanical behaviour of granular mixtures: a DEM study

An efficient algorithm for granular dynamics simulation with complex-shaped objects

Plastic deformations and strain hardening in fully dense granular crystals

SIMULATION OF MECHANICAL PROPERTIES FOR GRANULAR MATERIAL BY DISCRETE ELEMENT METHOD

Simulation of Collapse of Granular Columns Using the Discrete Element Method