Abstract:Aqueous zinc-ion batteries (ZIBs) have emerged as the most promising alternative energy storage system, but the development of a suitable cathode and the issues of Zn anodes have remained challenging. Herein, an effective strategy of high-capacity layered Mg0.1V2O5·H2O (MgVO) nanobelts together with a concentrated 3 M Zn(CF3SO3)2 polyacrylamide gel electrolyte was proposed to achieve a durable and practical ZIB system. By adopting the designed concentrated gel electrolyte which not only inherits the high-voltage window and wide operating temperature of the concentrated electrolyte but also addresses the Zn dendrite formation problem, the prepared cathode exhibits an ultrahigh capacity of 470 mAh g–1 and a high rate capability of 345 mAh g–1 at 5.0 A g–1, and the assembled quasi-solid-state ZIBs achieve 95% capacity retention over 3000 cycles as well as a wide operating temperature from −30 to 80 °C, demonstrating a promising prospect for large-scale energy storage. In situ X-ray diffraction, X-ray photoelectron spectroscopy, and thermogravimetric analysis (TGA) investigations also demonstrate a complex reaction mechanism for this cathode involving the (de)insertion of Zn2+, H+, and water molecules during cycling. The water molecules will reinsert into the interlayer and act as "pillars" to stabilize the host structure when Zn2+ is fully extracted.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsnano.0c06834?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsnano.0c06834</a>.Additional characterization of materials (TG analysis, ICP analysis, SEM images, XRD patterns, EDS images, etc.), performance including CV curves, charge–discharge curves, Tafel plot, EIS profiles, and comparison of performance (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.0c06834/suppl_file/nn0c06834_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

PVP surface modification layer spacing and vacancy enhanced zinc ions storage and stability

A durable VO<sub>2</sub>(M)/Zn battery with ultrahigh rate capability enabled by pseudocapacitive proton insertion

A durable VO2(M)/Zn battery with ultrahigh rate capability enabled by pseudocapacitive proton insertion

Polyvinylpyrrolidone‐Intercalated Mn0.07VOx toward High Rate and Long‐Life Aqueous Zinc‐Ion Batteries

Poly(3,4-ethylenedioxythiophene) Encapsulation/intercalation Boosting Stability and Zinc Ion Storage Properties of Vanadyl Phosphates

Regulating the Plating Process of Zinc with Highly Efficient Additive for Long-Life Zinc Anode

PVP-Induced Synergistic Engineering of Interlayer, Self-doping, Active Surface and Vacancies in VS4 for Enhancing Magnesium Ions Storage and Durability

Water molecules and oxygen-vacancy modulation of vanadium pentoxide with fast kinetics toward ultrahigh power density and durable flexible all-solid-state zinc ion battery

Better engineering layered vanadium oxides for aqueous zinc‐ion batteries: Going beyond widening the interlayer spacing

A Synergistically Regulated Cathode/Electrolyte Interphase With High Stability and Rapid Zn2+ Migration Toward Advanced Flexible Zinc-Ion Batteries

Stabilizing Zn Metal Anode Through Regulation of Zn Ion Transfer and Interfacial Behavior with a Fast Ion Conductor Protective Layer

Vanadium acid zinc induced by electrochemical self-optimization of oxygen-defect-rich vanadium trioxide with dual-types of carbon hybridization for accelerating zinc storage dynamics

Synergistic Structure Engineering and Electrochemical Activation Modulating Vanadium Oxide Cathode Toward Superior Zinc-Ion Storage

Interlayer-modified pseudocapacitive ammonium vanadium with high reversibility and stability enabling high-performance aqueous zinc-ion battery

Inhibiting cathode dissolution and shuttling of V–O species using a polybenzimidazole hydrogel electrolyte for durable high-areal-capacity Zn–V2O5 batteries

Layered Vanadium Oxides with Proton and Zinc Ion Insertion for Zinc Ion Batteries

Interspace and Vacancy Modulation: Promoting the Zinc Storage of an Alcohol-Based Organic-Inorganic Cathode in a Water-Organic Electrolyte

Boosting Proton Intercalation Via Sulfur Anion Doping in V2O3 Cathode Materials Towards High Capacity and Rate Performance of Aqueous Zinc Ion Batteries

Amphipathic Molecules Endowing Highly Structure Robust and Fast Kinetic Vanadium‐Based Cathode for High‐Performance Zinc‐Ion Batteries

Multiscale Interfacial Regulation of Zn‐V2O5 Pouch Cell via Ultrathin Molecular‐Engineered Separator

High-Capacity Layered Magnesium Vanadate with Concentrated Gel Electrolyte toward High-Performance and Wide-Temperature Zinc-Ion Battery