Abstract:This paper describes the measurement and reconstruction of the leaflet geometry for a pericardial heart valve. Tasks involved include mapping the leaflet geometries by laser digitizing and reconstructing the 3D freeform leaflet surface based on a laser scanned profile. The challenge is to design a prosthetic valve that maximizes the benefits offered to the recipient as compared to the normally operating naturally-occurring valve. This research was prompted by the fact that artificial heart valve bioprostheses do not provide long life durability comparable to the natural heart valve, together with the anticipated benefits associated with defining the valve geometries, especially the leaflet geometries for the bioprosthetic and human valves, in order to create a replicate valve fabricated from synthetic materials. Our method applies the concept of reverse engineering in order to reconstruct the freeform surface geometry. A Brown & Shape coordinate measuring machine (CMM) equipped with a HyMARC laser-digitizing system was used to measure the leaflet profiles of a Baxter Carpentier-Edwards pericardial heart valve. The computer software, Polyworks was used to pre-process the raw data obtained from the scanning, which included merging images, eliminating duplicate points, and adding interpolated points. Three methods, creating a mesh model from cloud points, creating a freeform surface from cloud points, and generating a freeform surface by B-splines are presented in this paper to reconstruct the freeform leaflet surface. The mesh model created using Polyworks can be used for rapid prototyping and visualization. To fit a freeform surface to cloud points is straightforward but the rendering of a smooth surface is usually unpredictable. A surface fitted by a group of B-splines fitted to cloud points was found to be much smoother. This method offers the possibility of manually adjusting the surface curvature, locally. However, the process is complex and requires additional manipulation. Finally, this paper presents a reverse engineered design for the pericardial heart valve which contains three identical leaflets with reconstructed geometry.

3D Printing-Assisted Energy Loss Testing of Artificial Aortic Heart Valves

An Approach for Designing Patient-Specific Prosthetic Aortic Valves Based on CTA Images Using Fluid-Structure Interaction (FSI) Method.

In vitro investigation of the blood flow downstream of a 3D-printed aortic valve

Multifunctional Artificial Artery from Direct 3D Printing with Built‐In Ferroelectricity and Tissue‐Matching Modulus for Real‐Time Sensing and Occlusion Monitoring

3D Printing for Energy-Saving: Evidence from Hydraulic Manifolds Design

MECHANICAL PROPERTIES OF 3D-PRINTED BLOOD VESSELS

Aortic Valve Engineering Advancements: Precision Tuning with Laser Sintering Additive Manufacturing of TPU/TPE Submillimeter Membranes

DEVELOPMENT OF HEART-LIKE STRUCTURE EMPLOYING ADDITIVE MANUFACTURING TECHNOLOGIES

Flexible Pressure Sensor Inside Cardiovascular: A Pilot Study On the 3D Printed Artificial Heart System.

Manufacturing an artificial arterial tree using 3D printing

3D printed heart valve mediated nitric oxide sustained release reduced potential for calcification and inflammatory capacity

Prototyping sutureless shape-memory valve stent via integrated 3D printing

Challenges with 3D printed parts for hydraulic experimental benchmarks: A perforated plate case study

Towards Longitudinal Monitoring of Leaflet Mobility in Prosthetic Aortic Valves via In-Situ Pressure Sensors: In-Silico Modeling and Analysis

Fluid-Solid Interaction Analysis for Developing In-Situ Strain and Flow Sensors for Prosthetic Valve Monitoring

Configurable 3D Printed Microfluidic Multiport Valves with Axial Compression

ADEPT: A Noninvasive Method for Determining Elastic Properties of Valve Tissue

Fluid Dynamic Characterization of Transcatheter Aortic Valves Using Particle Image Velocimetry

Measurement and reconstruction of the leaflet geometry for a pericardial artificial heart valve

Mechanism of Blood Flow Energy Loss in Real Healthy Aorta Using Computational Fluid-Structure Interaction Framework

Formulation and Evaluation of PVA/Gelatin/Carrageenan Inks for 3D Printing and Development of Tissue‐Engineered Heart Valves (Adv. Funct. Mater. 7/2024)