Abstract:Despite great improvements in computing hardware and developments of new methodologies for solving partial differential equations (PDEs), solving PDEs numerically can still be computationally prohibitive for certain applications. This computational difficulty is especially true when the solution of PDEs is tied to characterization, control, design, or other inverse problems in general. Most of the traditional PDE solution strategies, such as the Finite Element Method or Finite Volume Method can require hundreds of thousands of degrees of freedom to accurately capture the behavior of even relatively simple physical system. The computational cost is several orders of magnitude higher for solving optimization problems (a common approach to solve inverse problems), which require obtaining several solution fields. Hence, model order reduction is necessary to enable the solution of such optimization problems with sufficient efficiency to allow practical applicability. Several approaches have been developed to create accurate reduced-order models (ROMs) of physical systems with dramatically reduced computational expense. Yet, several questions remain as to the optimal approach to create ROMs for a given physical system to ensure suitable accuracy, and even more so in relation to inverse problem applications. The objective of the present work is to address issues relating to the creation of suitably accurate ROMs that can be utilized for the solution of a variety of computational inverse mechanics problems. This work focuses on ROMs that utilize proper orthogonal decomposition (POD) to create a reduced-order basis for the PDE solution from a set of previously obtained potential solution fields (i.e., snapshots) of the system of interest. First, a generally applicable algorithm is presented to efficiently create accurate ROMs for use in solving inverse problems in material characterization (i.e., nondestructive evaluation). This algorithm is based upon a novel concept for maximizing the diversity of the system snapshots used to create the ROM. Results show that by maximizing the snapshot diversity, the accurate generalization of the resulting ROM is substantially improved, which then improves inverse problem solution capabilities. Then, a comprehensive study is presented of the capability of a set of different approaches for reduced-order modeling (all still using POD) to represent systems involving flow past bluff bodies. One of the relatively unexplored issues when creating ROMs for fluid flows is the accuracy with respect to changes in Reynolds (Re) number. The present work uses the generalized POD technique to create ROMs that are capable of predicting flow field not only at different time levels, but also at different Re numbers. Finally, the ROM strategies explored for fluid flow were extended to investigate the applicability to optimal flow control problems. The ROM of flow was used along with an optimization technique and adjoint method for gradient calculation to solve a control problem to reduce the drag force in flow past one or more cylinders. Results of the solution of this optimal control problem show that the developed ROMs are capable of solving complex optimization problems with significantly reduced computational expense.

A reduced-order Schwarz domain decomposition method based on POD for the convection-diffusion equation

POD-based Reduced Order Optimal Control of Parabolic PDE Systems Via Diffusivity-Interior-boundary Actuation

On Recursive Proper Orthogonal Decomposition Via Perturbation Theory with Applications to Distributed Sensing in Cyber-Physical Systems.

An Optimized Dispersion-Relation-Preserving Combined Compact Difference Scheme to Solve Advection Equations

A domain decomposing reduced-order method for solving the multi-domain transient heat conduction problems

Applying Proper Orthogonal Decomposition to Parabolic Equations: A Reduced Order Numerical Approach

A Mass-Conservative Reduced-Order Algorithm in Solving Optimal Control of Convection-Diffusion Equation

An Augmented Subspace Based Adaptive Proper Orthogonal Decomposition Method for Time Dependent Partial Differential Equations

Accelerating the solution of linear systems appearing in two-phase reservoir simulation by the use of POD-based deflation methods

A discontinuous Galerkin Method based on POD model reduction for Euler equation

Reduced order model of a convection-diffusion equation using Proper Orthogonal Decomposition

Stochastic Domain Decomposition Based on Variable-Separation Method

Comparison of POD reduced order strategies for the nonlinear 2D Shallow Water Equations

A reduced Galerkin finite element formulation based on proper orthogonal decomposition for the generalized KDV-RLW-Rosenau equation

A boundary-oriented reduced Schwarz domain decomposition technique for parametric advection-diffusion problems

Ensemble Domain Decomposition Algorithm for the Fully Mixed Random Stokes–Darcy Model with the Beavers–Joseph Interface Conditions

A reduced order finite difference method for solving space-fractional reaction-diffusion systems: The Gray-Scott model

Incremental Proper Orthogonal Decomposition Based Method for the Analyzation of Large Scale High Fidelity Simulation Results

Super-localized orthogonal decomposition for convection-dominated diffusion problems

Reduced-Order Modeling Toward Solving Inverse Problems in Solid Mechanics and Fluid Dynamics

A New Proper Orthogonal Decomposition Method with Second Difference Quotients for the Wave Equation