Abstract:The multistage microporous electrocatalysts to assist the energy-efficient hydrogen generation from water electrolysis were fabricated on the surface of three-dimensional porous foam (NF) by a one-step hydrothermal synthesis strategy. When the molar ratio of sulfur to phosphorus in the initial mixed solution was 1:1, an amorphous P-doped nickel-based sulfide (NiSP/NF) electrocatalyst, with Ni3S2 and NiPS3 as the main and secondary crystalline phase, respectively, was obtained by hydrothermal treatment at 120 degrees C for 24 h. Thanks to its unique bi-hierarchy microporous structure composed of interwoven interconnected ultra-thin nanosheets, yielding the nearly 14-fold increased electrochemical active surface area (ECSA), sufficient active sites and interface channels are provided for hydrogen evolution reaction (HER) during water splitting. Meanwhile, benefiting from the lattice defects created by crystalline Ni3S2 and the strong electronic interactions with crystalline P doping phases, respectively, the intrinsically catalytic activity of nickel-based electrocatalyst was significantly enhanced. The synergistic effects enable NiSP/NF to exhibit remarkable performances during the whole water splitting, achieving a current density of 10 mA center dot cm(-2) in 1 mol center dot L-1 KOH solution with overpotentials for HER and OER as low as 67 and 212 mV, respectively. Assembled as an electrolyzer for overall water splitting (OWS), a current density of 100 mA center dot cm(-2) can be achieved only needing a cell voltage of 1.878 V, even at 500 mA center dot cm(-2) the needed cell voltage was only 2.558 V for NiSP/NF, which is dramatically superior to noble metal catalysts and helpful to improve hydrogen production efficiency for water electrolysis. Particularly, as a bifunctional electrocatalyst, NiSP/NF also exhibited excellent long-term stability and durability, because of less than a 0.03 V cell voltage increase after running a 120-hour chronopotentiometric test at 500 mA center dot cm(-2).

Nitrogen-Doped Porous Nickel Molybdenum Phosphide Sheets for Efficient Seawater Splitting.

NiS-MoS2 Hetero-Nanosheet Array Electrocatalysts for Efficient Overall Water Splitting

N, P co-doped Ni/Mo-based multicomponent electrocatalysts in situ decorated on Ni foam for overall water splitting

NiP/Fe 3 P/MoP@NF nanoblocks as a bifunctional electrocatalyst for water splitting in alkaline seawater and urea solution

Surface Corrosion‐Resistant and Multi‐Scenario MoNiP Electrode for Efficient Industrial‐Scale Seawater Splitting

Sandwich structured Ni<sub>3</sub>S<sub>2</sub>-MoS<sub>2</sub>-Ni<sub>3</sub>S<sub>2</sub>@ Ni foam electrode as a stable bifunctional electrocatalyst for highly sustained overall seawater splitting

Interfacial Electronic Modification of Nickel Phosphide via Iron Doping: An Efficient Bifunctional Catalyst for Water/Seawater Splitting

Sandwich structured Ni3S2-MoS2-Ni3S2@Ni foam electrode as a stable bifunctional electrocatalyst for highly sustained overall seawater splitting

Superhydrophilicity and superaerophobicity Ni/Ni3S4/1T-MoS2 for hydrazine-assisted seawater splitting

Atomic Heterointerface Engineering of Nickel Selenide Confined Nickel Molybdenum Nitride for High‐performance Solar‐driven Water Splitting

An ultra-low Pt metal nitride electrocatalyst for sustainable seawater hydrogen production

Bimetallic Nickel-Molybdenum/tungsten Nanoalloys for High-Efficiency Overall Hydrazine Splitting in Seawater Electrolytes

Multistage Microporous Bifunctional Catalyst Constructed by P-doped Nickel-Based Sulfide Ultra-Thin Nanosheets for Energy-Efficient Hydrogen Production from Water Electrolysis

Multicomponent nickel-molybdenum-tungsten-based nanorods for stable and efficient alkaline seawater splitting

Sulfur Doped FeOx Nanosheet Arrays Supported on Nickel Foam for Efficient Alkaline Seawater Splitting

Zn-Doped Nickel Iron (Oxy)Hydroxide Nanocubes Passivated by Polyanions with High Catalytic Activity and Corrosion Resistance for Seawater Oxidation

Nitrogen and Sulfur Co-Doped Carbon-Coated Ni3S2/MoO2 Nanowires as Bifunctional Catalysts for Alkaline Seawater Electrolysis

Interfacial Electronic Engineering of Heterostructured Co2P-MoNiP/NF Nano-Sea-urchin Catalysts for Efficient and Stable Hydrogen Evolution Via Water/seawater Splitting

Construction of Heterojunction-Rich Metal Nitrides Porous Nanosheets Electrocatalyst for Alkaline Water/Seawater Splitting at Large Current Density

Atomic Heterointerface Engineering of Ni2P‐NiSe2 Nanosheets Coupled ZnP‐Based Arrays for High‐Efficiency Solar‐Assisted Water Splitting

Synergistically enhanced activity and stability of bifunctional nickel phosphide/sulfide heterointerface electrodes for direct alkaline seawater electrolysis