Abstract:Structural Health Monitoring, Ahead of Print. A robust computer vision system is proposed to visualize subsurface barely visible impact damage (BVID) in composite structures through a simple image correlation technique together with a damage imaging condition. This system uses a digital camera to record a video of the surface motion, capturing micron-scale dynamic movement from guided waves propagating on the surface of the structure generated via a sweeping frequency excitation (chirp) up to the ultrasonic frequency range. As the excitation frequency changes during the chirp, waves become trapped within this damaged region, forming standing waves to generate local resonance at specific frequencies. This localized resonance accumulates high wave energy in the region, generating a higher transverse displacement at the damage site compared to the remaining part of the structure. In this work, a simple image correlation technique is proposed to correlate each filtered video frame with the temporal mean of the filtered wavefield video to highlight standing waves at localized damage. The proposed image correlation technique is distinct from digital image correlation (DIC) since it does not use correlation for subset matching to track the movement of surface patterns between two images (video frames). Instead, it uses correlation to directly quantify similarities between corresponding image pixels (windows). Utilizing a single camera greatly simplifies system complexity and hence enhances the practicality and potential for real-time performance over a recently developed technique that utilized 3D DIC with a stereo camera for vision-based BVID detection. To realize the aim, work was conducted in two sequential steps: (1) off-axis 2D DIC was employed rather than 3D DIC to examine the potential of employing a single camera to capture images and extract not only in-plane displacement but also a fraction of transverse displacement in which local resonance is dominant and (2) image correlation was then employed, supplanting the off-axis 2D DIC image processing involved in the first step, to highlight the damage with significantly less processing complexity. This proposed technique using a zero-mean normalized cross-correlation imaging condition, rather than the total wave energy used for DIC-based approaches, is efficient and effective for identifying regions of minute surface movement from local resonance within the damage region without the use of the computationally intensive interpolation to get the sub-pixel gray level information followed by subset matching employed in DIC-based image processing. Two geometrically identical CFRP composite honeycomb panels that had been subjected to low-velocity impacts were used for verification and validation, and two excitation location configurations were tested for each panel. Damaged images produced with correlation for a 100 mm × 100 mm field of view using a single 3-s video, or a total of 19,200 video frames, show accurate damage imaging capabilities regardless of excitation location that exceed that of DIC techniques and is comparable to benchmark damage images obtained from laser Doppler vibrometry, ultrasonic C-scans, and X-ray CT scans. This success of correlation-based imaging of subsurface BVID demonstrates substantial improvements in efficiency and practicality and shows high potential for in situ and real-time computer vision-based nondestructive inspection or structural health monitoring of subsurface BVID in composite aircraft and other critical structures.

Damage Detection and Quantification via Multiview DIC at Varying Scales

Detection and Quantification of Damage in Metallic Structures by Laser-Generated Ultrasonics

Digital image correlation analyses of masonry infilled frame: Uncertainty-based mesh refinement and damage quantification

Vibration-based hidden damage imaging using stereo cameras with digital image correlation

A Survey On Damage Detection Methods: Advantages And Shortages

An Overview of 38 Least Squares–based Frameworks for Structural Damage Tomography

Damage identification in composite structures using high-speed 3D digital image correlation and wavelet analysis of mode shapes

Damage Imaging Post Processing for Delamination Size Assessment of CFRP Aeronautic Structures

A quantitative multidamage monitoring method for large-scale complex composite

Upcoming damage size quantification in aeronautic composite structures based on imaging results post-processing

Initial structural damage detection approach via FE-based data augmentation and class activation map

Damage quantification using transfer component analysis combined with Gaussian process regression

Towards Automatic Crack Size Estimation with iFEM for Structural Health Monitoring

Lamb Wave-Based Damage Localization and Quantification in Composites Using Probabilistic Imaging Algorithm and Statistical Method

Full‐field out‐of‐plane vibration displacement acquisition based on speckle‐projection digital image correlation and its application in damage localization

Damage detection of thin plates by fusing variational mode decomposition and spectral entropy

Multiscale Damage Analyses of Red Sandstone in Uniaxial Compression Based on Advanced Digital Volume Correlation

An extended diffraction tomography method for quantifying structural damage using numerical Green's functions

A simple image correlation technique for imaging subsurface damage from low-velocity impacts in composite structures

Strain Monitoring on Damaged Composite Laminates Using Digital Image Correlation

Full-field Deformation Measurement of 2D-DIC Based on Virtual Camera Array in Small Field of View