Abstract:In this study, as part of basic research aimed at enhancing the accuracy of load and resistance coefficients to ensure their suitability for practical design and promoting the application of underutilized reliability-based design in Korea, the author conducts optimal design based on the reliability analysis of a vertical-type breakwater in the seas off of Haeundae, Yeosu, Mokpo, Gunsan, and Incheon—representative ports in Korea. In doing so, the author utilized the double-loop approach, which simultaneously addresses a reliability problem nested within an optimization process, employing the Polak–He optimization algorithm. To mitigate the substantial numerical effort required by the double-loop approach based on the Polak–He optimization algorithm, which necessitates the gradients of both cost and constraint functions, the subset simulation method was employed. In this process, the author deliberately refrained from using design waves of a specific return period and linear probabilistic models such as the Gaussian distribution, especially concerning wave and lift forces, often viewed as barriers to the widespread application of reliability-based design in Korea. Instead, the author focused on characterizing the uncertainties associated with the wave force, lift force, and overturning moment—variables that significantly impact the integrity of vertical-type breakwaters—by developing probabilistic models for these random variables directly from long-term in situ wave data. These models capture the varied characteristics of the Korean marine environment from sea to sea. In this way, the need for additional assumptions concerning the interrelationship between significant wave and maximum wave heights, along with the wave period, can be eliminated. Following Occam's razor principle, which suggests that explanations constructed with the smallest possible set of assumptions are superior, the reliability-based design optimization of a vertical-type breakwater presented in this study demonstrates promise in terms of simplicity and practicality. The limit state of the vertical-type breakwater was defined to encompass sliding, overturning, and collapse failures, and the strong interrelations between the wave force, lift force, and overturning moment were described using the Nataf joint distribution. As anticipated, simulation results show that solely considering sliding failure, as in the current reliability-based design platform in Korea, leads to an underestimated failure probability. Furthermore, ensuring a consistent failure probability for vertical-type breakwaters using design waves with a specific return period, as in past studies, is not feasible. In contrast, this study demonstrated that breakwaters optimally designed to meet the reliability index requirement of β = 3.5–4 consistently maintain a target failure probability in all sea areas.

Evaluation of Pedestrian Safety for Wave Overtopping by Ship-Induced Waves in Waterfront Revetment

Numerical Investigations of Pedestrian Overboard on a Compound Slope Dike Due to Excessive Overtopping Waves

Study on the Characteristics of Flow over a Seawall and Its Impact on Pedestrians under Solitary Wave Action

Numerical Analysis Impact of Ship Building & Repairing on Surrounding Waters

Coupled Computational Fluid Dynamics-Discrete Element Method for Simulating the Interactions Between Ship-Induced Waves and Riprap on Restricted Waterway Banks

Reliability-Based Design of Vertical-Type Breakwaters Considering Varied Characteristics of Korean Marine Environment from Sea to Sea

Experimental Investigation of Wave Propagation and Overtopping over Seawalls on a Reef Flat

Preliminary Study on an amendment to the Design Guideline of Outer Port Facilities Against Harsh Wave Conditions due to Climate Change based on Design Fidelity Index

Experimental Study of Wave Overtopping Flow Behavior on Composite Breakwater

Changes in the Sediment Transport Pattern after Breakwater Extension at Anmok Port, Korea

Analysis of Shoreline Change Due to the Installation of Hybrid Coastal Structure with Submerged Aquatic Vegetation (SAV)

Calculation of categorical route width according to maritime traffic flow data in the Republic of Korea

Reliability-based design optimization for a vertical-type breakwater with multiple limit-state equations under Korean marine environments varying from sea to sea

Evaluation of beach response due to construction of submerged detached breakwater

Probabilistic Risk Evaluation for Overall Stability of Composite Caisson Breakwaters in Korea

Establishment of a Safety Management System for Waterfront Spaces Related to Marine Leisure Activities in Korea

Machine learning tool for wave overtopping prediction based on the safety-operability ratio

Surge-Wave Combined Inundation at Mokpo North Harbour, Korea

Optimal maritime traffic width for passing offshore wind farms based on ship collision probability

Numerical Study on Early Sand Movement in Front of a Coastal Revetment Using the NWT-DEM Two-Way Coupled Model

Improved Coastal Erosion Prevention Using a Hybrid Method with an Artificial Coral Reef: Large-Scale 3D Hydraulic Experiment