Abstract:By comparing two digital images of a test planar specimen surface recorded in different configurations, two-dimensional digital image correlation (2D-DIC) provides full-field displacements to sub-pixel accuracy and full-field strains in the recorded images. For the 2D-DIC systems using an optical lens, a simple pinhole imaging model is commonly used to describe the linear relationship between the measured sensor plane displacements and the actual displacements in the object surface. However, in a practical measurement, various unavoidable disadvantageous factors, such as small out-of-plane motion of the test object surface occurred after loading, small out-of-plane motion of the sensor target due to the self-heating or temperature variation of a camera, and geometric distortion of the imaging lens, may seriously impair or slightly change the originally assumed linear correspondence. In certain cases, these disadvantages may lead to significant errors in displacements and strains measured by 2D-DIC. In this work, the measurement errors of 2D-DIC due to the above three disadvantageous factors are first described in detail. Then, to minimize the errors associated with these disadvantages, a high-accuracy 2D-DIC system using a bilateral telecentric lens is established. The performance of the established 2D-DIC system and other two 2D-DIC systems using a conventional lens and an object-side telecentric lens are investigated experimentally using easy-to-implement stationary, out-of-plane and in-plane rigid body translation tests. A detailed examination reveals that a high-quality bilateral telecentric lens is not only insensitive to out-of-plane motion of the test object and the self-heating of a camera, but also demonstrates negligible lens distortion. Uniaxial tensile tests of an aluminum specimen were also performed to quantitatively compare the axial and transversal strains measured by the proposed 2D-DIC system and those measured by strain gage rosettes. The perfect agreement between the two measurements further verifies the accuracy of the established 2D-DIC system.

Lens distortion correction for improving measurement accuracy of digital image correlation

Assessment and Correction of Lens Distortion for Digital Image Correlation

Distortion Correction in Surface Defects Evaluating System of Large Fine Optics

Lens distortion correction for digital image correlation by measuring rigid body displacement

Systematic Errors in Two-Dimensional Digital Image Correlation Due to Lens Distortion

A New Approach for Distorted Image Restoration by Distance-based Correction and Cubic Spline Interpolation

Digital Image Correlation Strain Measurement Based on Moving Least-squares Fitting

High-accuracy 2D Digital Image Correlation Measurements Using Low-Cost Imaging Lenses: Implementation of a Generalized Compensation Method

Accuracy Evaluation of Optical Distortion Calibration by Digital Image Correlation

Displacement measurement of specimen surfaces with damaged areas by digital image correlation

Lens Distortion Correction Method Based on Cross-Ratio Invariability and Compressed Sensing

Lens Distortion Correction Method Based on Linear Approximation

Improved Digital Image Correlation Method for Eliminating Pixel Shape-Induced Errors in Shear-Strain Calculations

Large Deformation Measurement Using Digital Image Correlation: A Fully Automated Approach

High-Accuracy 2D Digital Image Correlation Measurements with Bilateral Telecentric Lenses: Error Analysis and Experimental Verification

Digital Speckle Marginal Correlation Measuring Method

Distortion correction method in the high-precision and high-speed CCD measurement system

Research on High-Precision Digital Image Correlation Measurement Techniques for Highly Stable Structures

Optical Distortion Evaluation Based on the Integrated Colour CCD Moire Method

Modified color CCD moiré method and its application in optical distortion correction

Progress in Digital Image Correlation Method