Abstract:Journal of Composite Materials, Ahead of Print. Hybridizing the natural fibers with stronger synthetic fibers could significantly improve the properties of the natural fiber-reinforced composites. The improved mechanical capabilities of fiber reinforced polymers result from the fiber's capacity for withstanding a more substantial portion of the mechanical load compared to the matrix it replaces. In order to guarantee the efficient transfer of the mechanical load from the matrix to the reinforcement, it is necessary to incorporate a fibrous filler. Transference takes place when the length of the fiber is longer than a specific critical length. Fibers which are shorter than the critical length will pull out from the matrix when tested to a tensile load. In some cases, complete transfer of the load is not performed. The goal of this study is to learn more about flax (FF), glass (GF), and mixtures of flax and glass (FF + GF) short fiber-reinforced PLA-PBS composites. This is performed to find out how the flax/glass combination affects the mechanical properties of PLA-PBS-reinforced short fiber composites. In order to extend their use for industrial applications, these composites were manufactured via extrusion and, afterward, injection molding. Fiber aspect ratios were followed after compounding and injection processing. The analysis of fiber lengths reveals a noteworthy observation: the proportion of fibers exceeding their critical length of 531 μm and 772 μm for FF and GF, respectively, is more significant when flax fibers (FF) and glass fibers (GF) are combined compared to when they reinforce the composite individually. Specifically, the composite containing both FF and GF exhibits a higher percentage of fibers surpassing their critical length, compared to their individual reinforcement in the composite. The results reveal that 27% of individually extracted single FF exceed their critical length, whereas a higher proportion, at 34%, is observed when FF is part of the composite mixture. In contrast, the critical length is surpassed by only 4% of individually extracted single GF, whereas the combined presence of GF in the composite results in a notably higher percentage, at 19%. The tensile properties of these composites were investigated considering the effect of the hybridization by flax/glass short fibers. It was noted that the tensile properties of the hybrid composites increase comparing to the flax composites from 42.4 MPa to 53 MPa for the tensile strength and from 4.9 GPa to 5.4 GPa for the tensile modulus. In contrast, the elongation at break of the hybrid composites decreases from 1.7% to 1.5% with the incorporation of glass fibers. The experimental results were compared with the predictions of the mixture law and the Cox-Krenchel model. The findings indicate that mixing synthetic fibers with natural fibers is an excellent approach to enhancing mechanical properties.

Analysis of mechanical properties and free vibrational characteristics of novel Grewia optiva/basalt fiber reinforced hybrid polymer composites

Characterization and potential applications of Grewia hirsuta fibers: nature's own composite materials

Synthesis and Characterizations of Silane Treated Grewia optiva Fibers

Fabrication and Investigation on Basalt Fiber and Jute Fiber Reinforced Hybrid Composites

Dynamic Mechanical Properties and Thermal Properties of Longitudinal Basalt/Woven Glass Fiber Reinforced Unsaturated Polyester Hybrid Composites

Analyses on flexural properties and process optimization of bamboo fiber-polypropylene composites for automobile applications

Investigation of Mechanical Attributes and Dynamic Mechanical Analysis of Hybrid Polyester Composites for Automotive Applications

Sustainable engineering applications using jute-basalt fiber reinforced composites: A material characterization study

Numerical and Experimental Analysis of Mechanical Properties in Hybrid Epoxy-Basalt Composites Partially Reinforced with Cellulosic Fillers

Experimental and validation of the mechanical characteristics of bio based hybrid composites

Characterization of natural cellulosic fiber extracted from Grewia ferruginea plant stem

Investigation of the hybridization effect on mechanical properties of natural fiber reinforced biosourced composites

Eco‐friendly recycled glass fiber and bamboo fiber reinforced epoxy‐SiO2 polymer hybrid composite: Development and mechanical characterization

Experimental investigation on mechanical performance and drilling behavior of hybrid polymer composites through statistical and machine learning approach

Experimental investigations on the fatigue behavior of hybrid basalt/glass fiber epoxy composites

Mechanical Properties of E-Glass Fiber - Basalt Fiber Reinforced Polymer Matrix Composite

Effects of fiber type, content, orientation, and surface treatments on the mechanical properties of PAFRP composite

Sustainable fiber extraction and determination of mechanical and wear properties of Borassus flabellifer sprout fiber-reinforced polymer composites

Modeling and optimization of the manufacturing parameters of a hybrid fiber reinforced polymer composite PxGyEz

Development of hybrid green composites by dual natural fibers (jute/bamboo) reinforcement and investigation of their mechanical behavior

Manufacturing of a natural fiber/glass fiber hybrid reinforced polymer composite (PxGyEz) for high flexural strength: an optimization approach