Abstract:In this study, a novel proton-conducting polymer electrolyte membrane based on a mixture of polyvinyl alcohol (PVA)/polyvinyl pyrrolidone (PVP) (1:1) mixed with different ratios of graphene oxide (GO) and plasma-treated was successfully synthesized. Dielectric barrier dielectric (DBD) plasma was used to treat the prepared samples at various dose rates (2, 4, 6, 7, 8, and 9 min) and at fixed power input (2 kV, 50 kHz). The treated samples (PVA/PVP:GO wt%) were soaked in a solution of styrene and tetrahydrofuran (70:30 wt%) with 5 × 10 −3 g of benzoyl peroxide as an initiator in an oven at 60 °C for 12 h and then sulfonated to create protonic membranes (PVA/PVP-g-PSSA:GO). The impacts of graphene oxide (GO) on the physical, chemical, and electrochemical properties of plasma-treated PVA/PVP-g-PSSA:x wt% GO membranes (x = 0, 0.1, 0.2, and 0.3) were investigated using different techniques. SEM results showed a better dispersion of nanocomposite-prepared membranes; whereas the AFM results showed an increase in total roughness with increasing the content of GO. FTIR spectra provide more information about the structural variation arising from the grafting and sulfonation processes to confirm their occurrence. The X-ray diffraction pattern showed that the PVA/PVP-g-PSSA:x wt% GO composite is semi-crystalline. As the level of GO mixing rises, the crystallinity of the mixes decreases. According to the TGA curve, the PVA/PVP-g-PSSA:x wt% GO membranes are chemically stable up to 180 °C which is suitable for proton exchange membrane fuel cells. Water uptake (WU) was also measured and found to decrease from 87.6 to 63.3% at equilibrium with increasing GO content. Ion exchange capacity (IEC) was calculated, and the maximum IEC value was 1.91 meq/g for the PVA/PVP-g-PSSA: 0.3 wt% GO composite membrane. At room temperature, the maximum proton conductivity was 98.9 mS/cm for PVA/PVP-g-PSSA: 0.3 wt% GO membrane. In addition, the same sample recorded a methanol permeability of 1.03 × 10 −7 cm 2 /s, which is much less than that of Nafion NR-212 (1.63 × 10 −6 cm 2 /s). These results imply potential applications for modified polyelectrolytic membranes in fuel cell technology.

Wettability of sulfonated graphene oxide membranes for proton exchange membrane fuel cells

Investigation of Sulfonated Graphene Oxide as the Base Material for Novel Proton Exchange Membranes

Rational Design of Sulfonated Poly(ether Ether Ketone) Grafted Graphene Oxide-Based Composites for Proton Exchange Membranes with Enhanced Performance

Sulfonated Graphene Oxide Doped Sulfonated Polybenzothiazoles for Proton Exchange Membrane Fuel Cells

Enhanced Proton Conductivity of Sulfonated Polysulfone Membranes under Low Humidity via the Incorporation of Multifunctional Graphene Oxide

Sulfonated Graphene Oxide–silica for Highly Selective Nafion-based Proton Exchange Membranes

Designing Carbon/Oxygen Ratios of Graphene Oxide Membranes for Proton Exchange Membrane Fuel Cells

Enhancement of Proton/methanol Selectivity Via the In-Situ Cross-Linking of Sulfonated Poly (P-Phenylene-co-aryl Ether Ketone) and Graphene Oxide (GO) Nanosheets

SGO/SPEN-based Highly Selective Polymer Electrolyte Membranes for Direct Methanol Fuel Cells

Graphene oxide based nanohybrid proton exchange membranes for fuel cell applications: An overview

Transfer-free in-situ synthesis of high-performance polybenzimidazole grafted graphene oxide-based proton exchange membrane for high-temperature proton exchange membrane fuel cells

Highly selective sulfonated Poly (arylene ether nitrile) composite membranes containing copper phthalocyanine grafted graphene oxide for direct methanol fuel cell

Sulfonated Poly(arylene ether nitrile)-Based Composite Membranes Enhanced with Ca2+ Bridged Carbon Nanotube-Graphene Oxide Networks

SPEEK/SGO/SPEEK proton exchange membrane for direct methanol fuel cells

High conductive and dimensional stability proton exchange membranes with an all-carbon main chain and densely sulfonated structure

Enhanced Performance of Sulfonated Poly(ether ether Ketone) Hybrid Membranes by Introducing Sulfated MOF-808/Graphene Oxide Composites

Rational Design of S-UiO-66@GO Hybrid Nanosheets for Proton Exchange Membranes with Significantly Enhanced Transport Performance.

Composite membrane by incorporating sulfonated graphene oxide in polybenzimidazole for high temperature proton exchange membrane fuel cells

One-step Phosphorylation of Graphene Oxide for the Fabrication of Nanocomposite Membranes with Enhanced Proton Conductivity for Fuel Cell Applications

Graphene-Based Materials as Proton-Conducting Membranes for Electrochemical Technologies

Effect of Plasma pretreatment and Graphene oxide ratios on the transport properties of PVA/PVP membranes for fuel cells