Abstract:Through designing hierarchical structures, particularly optimizing the chemical and architectural interactions at its inorganic/organic interface, nacre has achieved an excellent combination of contradictory mechanical properties such as strength and toughness, which is highly demanded yet difficult to achieve by most synthetic materials. Most techniques applied to develop nacre-mimetic composites have been focused on mimicking the "brick-and-mortar" structure, but the interfacial architectural features, especially the asperities and mineral bridges of "bricks", have been rarely concerned, which are of equal importance for enhancing mechanical properties of nacre. Here, we used a modified bidirectional freezing method followed by uniaxial pressing and chemical reduction to assemble a nacre-mimetic graphene/poly(vinyl alcohol) composite film, with both asperities and bridges introduced in addition to the lamellar layers to mimic the interfacial architectural interactions found in nacre. As such, we have developed a composite film that is not only strong (up to ∼150.9 MPa), but also tough (up to ∼8.50 MJ/m3), and highly stretchable (up to ∼10.44%), difficult to obtain by other methods. This was all achieved by only interfacial architectural engineering within the traditional "brick-and-mortar" structure, without introducing a third component or employing chemical cross-linker as in some other nacre-mimetic systems. More importantly, we believe that the design principles and processing strategies reported here can also be applied to other material systems to develop strong and stretchable materials.

Nacreous aramid-mica bulk materials with excellent mechanical properties and environmental stability

Conch‐Shell‐Inspired Tough Ceramic

Bioinspired Hydroxyapatite/Poly(methyl Methacrylate) Composite with a Nacre‐Mimetic Architecture by a Bidirectional Freezing Method

Cost-effective Fabrication of Bio-Inspired Nacre-Like Composite Materials with High Strength and Toughness

Fabrication and Characterisation of Alumina/aluminium Composite Materials with a Nacre-Like Micro-Layered Architecture

Nacre-mimetic Composite with Intrinsic Self-Healing and Shape-Programming Capability

Superstretchable Nacre-Mimetic Graphene/Poly(Vinyl Alcohol) Composite Film Based on Interfacial Architectural Engineering

Exceptionally Ductile and Tough Biomimetic Artificial Nacre with Gas Barrier Function

Liquid crystal self-templating approach to ultrastrong and tough biomimic composites

Unprecedentedly Tough, Folding‐Endurance, and Multifunctional Graphene‐Based Artificial Nacre with Predesigned 3D Nanofiber Network as Matrix

Synthetic Nacre By Predesigned Matrix-Directed Mineralization

Strong and Tough MXene Bridging‐induced Conductive Nacre

Mass Production Of Bulk Artificial Nacre With Excellent Mechanical Properties

Superior Biomimetic Nacreous Bulk Nanocomposites by a Multiscale Soft-Rigid Dual-Network Interfacial Design Strategy

Nacre-like carbon fiber-reinforced biomimetic ceramic composites: Fabrication, microstructure, and mechanical performance

Silk Fibroin Nacre

Artificial Nacre with High Toughness Amplification Factor: Residual Stress‐Engineering Sparks Enhanced Extrinsic Toughening Mechanisms

A scalable hydrogel processing route to high-strength, foldable clay-based artificial nacre

Bio-inspired Clay Nanosheets/polymer Matrix/mineral Nanofibers Ternary Composite Films with Optimal Balance of Strength and Toughness

All-natural bioinspired nanolignocellulose-derived bulk engineering materials with excellent mechanical properties and environmental stability

Progress of Graphene-based Nacre-mimetic Layered Materials