Abstract:PIPELINES play an extremely important role throughout the world as a means of transporting gases and liquids over long distances from their sources to the ultimate consumers. The general public is not aware of the number of pipelines that are continually in service as a primarymeans of transportation. A buried operating pipeline is rather unobtrusive and rarely makes its presence known except at valves, pumping or compressor stations, or terminals. In the United States, there were approximately 217,000 km (135,000 mi) of hazardous liquid transmission pipelines, 34,000 km (21,000 mi) of crude oil gathering pipelines, 483,000 km (300,000 mi) of natural gas transmission pipelines, and 45,000 km (28,000 mi) of natural gas gathering pipelines in 2000 (Ref 1–3). There were approximately 60 major natural gas transmission pipeline operators and 150 major hazardous liquid pipeline operators in the United States in 1998 (Ref 4). The first oil pipeline, which was 175 km (109 mi) in length and 152 mm (6 in.) in diameter, was laid from Bradford to Allentown, PA in 1879 (Ref 5). Since the late 1920s, virtually all oil and gas pipelines have been made of welded steel. Although the first cross-country pipeline that connected some major cities was laid in 1930, it was not until World War II that largescale pipelines were laid connecting different regions of the country. In the 1960s, largerdiameter pipelines ranging from 813 to 914 mm (32 to 36 in.) were built. Discovery of oil on Alaska’s North Slope resulted in the construction of the country’s largest pipeline, the Trans-Alaska Pipeline System, with a 1219 mm (48 in.) diameter and 1287 km (800 mi) length. Demand continues to add more miles of pipelines. Table 1 provides a summary of the major accidents reported to the U.S. Department of Transportation by the operators for the 6-year period between 1994 and 1999 (Ref 6). The data show that for transmission pipeline systems (both hazardous liquid and natural gas), approximately 25% of all reported accidents were due to corrosion. Of the hazardous liquid pipeline accidents caused by corrosion, 65% were due to external corrosion and 34%were due to internal corrosion. For natural gas transmission pipeline accidents, 36% were caused by external corrosion and 63% were caused by internal corrosion. For natural gas distribution pipeline accidents, only approximately 4% of the total accidents were caused by corrosion, and the majority of those were caused by external corrosion. The accidents reported in Table 1 are for major accidents that resulted in injury, fatality, or more than $50,000 in property damage. In addition to the reportable accidents, an average of 8000 corrosion leaks per year are repaired on natural gas transmission pipelines (Ref 7), and 1600 spills per year are repaired and cleaned up for liquid product pipelines. In a summary report for incidents between 1985 and 1994, corrosion accounted for 28.5% of pipeline incidents on natural gas transmission and gathering pipelines (Ref 8). In a summary report for incidents between 1986 and 1996, corrosion accounted for 25.1% of pipeline incidents on hazardous liquid pipelines (Ref 9). These values correspond very well to the statistics for 1994 to 1999 presented in Table 1. Given the implications of pipeline failures and the role that external corrosion plays in these failures, it is apparent that proper corrosion control can have a major impact on the safety, environmental preservation, and the economics of pipeline operation. The vast majority of underground pipelines are made of carbon steel, based on American Petroleum Institute API 5L specifications (Ref 10). Typically, maximum composition limits are specified for carbon, manganese, phosphorous, and sulfur. In some cases, other alloying elements are added to improve mechanical properties. Composition and tensile requirements for common line pipe steels are shown in Table 2. These steels have inadequate alloy additions to be considered corrosion resistant and undergo

Freight Pipelines: Current Status and Anticipated Future Use

Exploring Subsea Dynamics: A Comprehensive Review of Underwater Pipelines and Cables

Automating Movement of Freight

Are freight pipelines a pipe dream? A critical review of the UK and European perspective

Current Status and Future Outlook of Pipeline Transportation Since the COVID-19

A0004213 1015..1025

Carbon dioxide transport via pipelines: A systematic review

Pipeline Transport Performance of Paste Backfill Slurry in Long-Distance Underground Backfilling: A Review

Advances in Abandonment and Disposal Technology of Aging Oil and Gas Pipelines

Pipeline In-Line Inspection Method, Instrumentation and Data Management

The Research on Flow Resistance of Transportation in Pipeline by a Model Test Stand

Pipeline rehabilitation systems for service life extension

Review on the transport capacity management of oil and gas pipeline network: Challenges and opportunities of future pipeline transport

Uplifting Behavior of Shallow Buried Pipe in Liquefiable Soil by Dynamic Centrifuge Test

Pipeline system for transporting consumer goods, parcels and mail in capsules

Pipeline transportation characteristics of filling paste-like slurry pipeline in deep mine

How does trenchless technology make pipeline construction greener? A comprehensive carbon footprint and energy consumption analysis

A Low-Cost Natural Gas/Freshwater Aerial Pipeline

Current Trends and Perspectives of Detection and Location for Buried Non-Metallic Pipelines

New application notion of pipeline transport——integrated in industry solid waste innocuous and efficient disposition

An analysis of pipeline technology for LNG installations