Abstract:Polymeric membrane has been widely used for the treatment of drinking water in China, and the total treating capacity has reached up to 3.8 million m ³/d. However, the membrane breakage found in the membrane modules in many water treatment plants resulted in an increase in turbidity and bacterial amount in the membrane permeate. In this study, a membrane module running for 3 years in a full-scale application was examined in terms of the breaking positions and the numbers of the broken fibers. It was found that most of the breaking positions were mainly on the outlet side of the module and that the distance from these points to the outlet was about 1/10–2/10 length of the membrane module. The lab-scale tests showed that the increase of the numbers of the breaking fibers in the membrane module (the breaking fibers were from 1 to 4 of 75 fibers) resulted in the increase in turbidity, particle count and the amount of total bacteria and coliform bacteria. Meanwhile, the water quality after the filtration with broken membrane fibers was similar to the quality of the raw water, which indicated that once the membrane fiber breakage occurred in the membrane module, the quality of drinking water after membrane filtration was significantly affected. Furthermore, the breaking position closer to the outlet side of the membrane module exposed much higher microbiological risk than those in the middle or near the bottom side. A pilot scale test was conducted by using a membrane module with 6600 fibers, and the effect of the membrane breakage (1–4 broken fibers) on water quality was also investigated. The results indicated that periodical backwashing caused drastic fluctuation of turbidity, particle count and the bacterial amount in the permeate water, which might be due to the washing force and self-blocking action inside the hollow fibers. Moreover, there is a good quantitative relationship (R ² = 0.945) between particle count and the bacterial amount, which indicated that an online detection of particle count can be used to evaluate the bacterial risk. It was also suggested that the online detection of particle count after backwashing within 100 s would be a quick and precise method to identify any fiber breakage in time. These results are very important for the safety issue in the application of polymeric membrane to water treatment plants.

Spectral fusion-based machine learning classifiers for discriminating membrane breakage in multiple scenarios

Classification of water contamination developed by 2-D Gabor wavelet analysis and support vector machine based on fluorescence spectroscopy.

Detection of Specific Contamination Events in Water Distribution System Using Ultraviolet Spectra.

Open-Set Recognition for Unknown Organic Pollutants in Drinking Water with 3-D Fluorescence Spectroscopy

Application Of Multi-Spectral Information Fusion For Water Quality Analysis

Novel Feature Extraction Method For Rapid Analysis Of Water Contaminants Based On Three-Dimensional Fluorescence And Absorption Spectroscopy

Detection of Water Contamination Events Using Fluorescence Spectroscopy and Alternating Trilinear Decomposition Algorithm

Revealing Key Structural and Operating Features on Water/salts Selectivity of Polyamide Nanofiltration Membranes by Ensemble Machine Learning

Integrated Models for Prediction and Global Factors Sensitivity Analysis of Ultrafiltration (UF) Membrane Fouling: Statistics and Machine Learning Approach

Classification of Organic Contaminants in Water Distribution Systems Developed by SPA and Multi-Classification SVM Using UV-Vis Spectroscopy

A Time Series Double Threshold Method for Pollution Events Detection in Drinking Water Using Three-Dimensional Fluorescence Spectroscopy

Information extraction of UV-NIR spectral data in waste water based on Large Language Model

Optical detection of contamination event in water distribution system using online Bayesian method with UV–Vis spectrometry

Machine Learning in Extreme Value Analysis, an Approach to Detecting Harmful Algal Blooms with Long-Term Multisource Satellite Data.

Portable fluorescence instrument for detecting membrane integrity in membrane bioreactor (MBR)

Simulation monitoring of tetracyclines in wastewater based on fluorescence image processing and machine learning classifier

In Situ Visualization of Membrane Fouling Evolution during Ultrafiltration Using Label-Free Hyperspectral Light Sheet Fluorescence Imaging

Membrane fouling prediction and uncertainty analysis using machine learning: A wastewater treatment plant case study

Characterization and recognition of three-dimensional excitation-emission matrix spectra of wastewater from six typical categories

Machine Learning Modeling of Fluorescence Spectral Data for Prediction of Trace Organic Contaminant Removal During UV/H2O2 Treatment of Wastewater

Impact of Polymeric Membrane Breakage on Drinking Water Quality and an Online Detection Method of the Breakage Part A Toxic/hazardous Substances & Environmental Engineering