Abstract:Two commercialized solid additives thieno[3,2‐b]thiophene (TT) and 3,6‐dibromothieno[3,2‐b]thiophene (TTB) are used to delicately regulate the blend film packing and crystallinity. High efficiencies of 17.75% with impressive thermal stability (T80 > 2800 h, 65 °C) and excellent photostability are achieved for TT‐treated PM6:Y6 devices and a significantly higher PCE of 18.3% is achieved employing D18:L8‐BO. Delicately manipulating nanomorphology is recognized as a vital and effective approach to enhancing the performance and stability of organic solar cells (OSCs). However, the complete removal of solvent additives with high boiling points is typically necessary to maintain the operational stability of the device. In this study, two commercially available organic intermediates, namely thieno[3,2‐b]thiophene (TT) and 3,6‐dibromothieno[3,2‐b]thiophene (TTB) are introduced, as solid additives in OSCs. The theoretical simulations and experimental results indicate that TT and TTB may exhibit stronger intermolecular interactions with the acceptor Y6 and donor PM6, respectively. This suggests that the solid additives (SAs) can selectively intercalate between Y6 and PM6 molecules, thereby improving the packing order and crystallinity. As a result, the TT‐treated PM6:Y6 system exhibits a favorable morphology, improved charge carrier mobility, and minimal charge recombination loss. These characteristics contribute to an impressive efficiency of 17.75%. Furthermore, the system demonstrates exceptional thermal stability (T80 > 2800 h at 65 °C) and outstanding photostability. The universal applicability of TT treatment is confirmed in OSCs employing D18:L8‐BO, achieving a significantly higher PCE of 18.3%. These findings underscore the importance of using appropriate solid additives to optimize the blend morphology of OSCs, thereby improving photovoltaic performance and thermal stability.

Addition of 2D Ti 3 C 2 T x to Enhance Photocurrent in Diodes for High‐Efficiency Organic Solar Cells

Ti 3 C 2 T x /PEDOT:PSS Composite Interface Enables over 17% Efficiency Non-fullerene Organic Solar Cells

Construction of TiO2 NP@TiO2 NT Double-Layered Structural Photoanode to Enhance Photovoltaic Performance of CdSe/CdS Quantum Dots Sensitized Solar Cells

Holistically Optimizing Charge Carrier Dynamics Enables High-Performance Dye-Sensitized Solar Cells and Photodetectors

A Broad-Spectrum Solid Additive to Further Boost High-Efficiency Organic Solar Cells via Morphology Regulation

Efficient Ti 3 C 2 T x MXene/TiO 2 Hybrid Photoanodes for Dye-Sensitized Solar Cells

Enhanced Photovoltaic Properties of Dye-Sensitized Solar Cell Based on Ultrathin 2D TiO2 Nanostructures

Two-Dimensional Graphitic Carbon Nitride for Improving the Performance of Organic Solar Cells.

ZnO/Ti3C2Tx Composite Photoanodes for Efficient Dye-Sensitized Solar Cells

Simultaneously Optimizing Molecular Stacking and Phase Separation via Solvent‐Solid Hybrid Additives Enables Organic Solar Cells with over 19% Efficiency

Volatilizable Solid Additive‐Assisted Treatment Enables Organic Solar Cells with Efficiency over 18.8% and Fill Factor Exceeding 80%

Single-Layered MXene Nanosheets Doping TiO 2 for Efficient and Stable Double Perovskite Solar Cells

Rational Design Of A Tripartite-Layered Tio2 Photoelectrode: A Candidate For Enhanced Power Conversion Efficiency In Dye Sensitized Solar Cells

Achieved 18.9% Efficiency by Fine‐Tuning Non‐Fullerene Acceptor Content to Simultaneously Increase the Short‐Circuit Current and Fill Factor of Organic Solar Cells

Enhanced short circuit current density and efficiency of ternary organic solar cells by addition of a simple copolymer third component

Efficient and stable organic solar cells enabled by incorporation of titanium dioxide doped PEDOT:PSS as hole transport layer

TiO2 nanoparticles via simple surface modification as cathode interlayer for efficient organic solar cells

Highly Efficient and Stable Organic Solar Cells Enabled by a Commercialized Simple Thieno[3,2‐b]thiophene Additive

Single-crystalline Ultrathin 2D TiO2 Nanosheets: A Bridge Towards Superior Photovoltaic Devices

A Bi-layer Composite Film Based on TiO 2 Hollow Spheres, P25, and Multi-walled Carbon Nanotubes for Efficient Photoanode of Dye-sensitized Solar Cell

Self-assembled ultrathin titania nanosheets as blocking layers for significantly enhanced photocurrent and photovoltage of dye-sensitized solar cells