Abstract:Deep desulfurization of fuels has long been and remains to be a highly challenging issue. In this work, a trilacunary polyoxometalate of Na12[α-P2W15O56]·24H2O (P2W15) was covalently tethered onto the γ-Al2O3 sphere, to which different alkyl chains (Cn, n = 8, 12, or 18) were grafted, leading to the formation of the Al2O3-P2W15-Cn. When the Al2O3-P2W15-Cn were applied to catalyze oxidative desulfurization reaction of dibenzothiophene (DBT) in the presence of H2O2, it displayed high efficiency for removal of sulfur content in 9 min under optimized conditions at 60 °C. In addition, the Al2O3-P2W15-Cn exhibited excellent structural stability during the catalytic reaction and can be used to remove 4,6-dimethyldibenzothiophene (4,6-DMDBT) and benzothiophene (BT) from fuel oils. The excellent performance of Al2O3-P2W15-C18 was verified by sulfur removal for an actual diesel sample. Molecular dynamics simulations indicated that DBT showed strong tendency to be adsorbed on active sites, while DBTO2 (dibenzothiophene sulfone) can be desorbed much easier. This work opens up a new avenue for further study on oxidative desulfurization catalytic materials and the influence of catalyst structure on mass transfer.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.energyfuels.0c03673?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.energyfuels.0c03673</a>.Characteristics of the simulated systems (Table S1), FT-IR spectra of catalysts (Figures S1 and S2), SEM and TEM images of catalysts (Figure S3), SEM-EDS of Al2O3-P2W15-C18 (Figure S4), textural properties of catalysts (Table S2), effect of temperature and amount of catalyst on sulfur removal of DBT (Figure S5), GC-FID analysis (Figure S6), effect of temperature and amount of H2O2 on sulfur removal of diesel fuel (Figure S7), comparison of catalytic oxidative desulfurization of real diesel and gasoline fuels by different immobilized catalytic systems (reported in literature) and the Al2O3-P2W15-C18 from the present study (Table S3), and the image of solubility about DBT and DBTO2 in octadecyltrichlorosilane (Figure S8) (<a class="ext-link" href="/doi/suppl/10.1021/acs.energyfuels.0c03673/suppl_file/ef0c03673_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Solar-powered commercial diesel fuel desulfurization: Exploring the factors affecting and recyclability of mesoporous Tl-doped TiO 2 nanofiber photocatalysts

Ag/Mo Doping for Enhanced Photocatalytic Activity of Titanium (IV) Dioxide during Fuel Desulphurization

Synthesis of Natural Porous Minerals Supported Tio2 Nanoparticles and Their Photocatalytic Performance Towards Rhodamine B Degradation

Ultrafast Oxidative Desulfurization of Diesel Fuels by Mass Transfer Enhancement of Polyoxometalate Modified Alumina Catalysts

Ultra-deep photocatalytic oxidative desulfurization of liquid fuels by Ti@CeO 2 /ZnO nanophotocatalyst under visible light and mild operating conditions

Hierarchically Nanoporous TS-1 Zeolites for Catalytic Oxidation Desulfurization of Liquid Fuels

Selective Adsorption of Thiophenic Compounds from Fuel over TiO2/SiO2 under UV-irradiation.

Simultaneous desulfurization and denitrogenation of diesel over Er/W-N-TiO2 photocatalyst

Synthesis of Hydrophobic Nanosized Hierarchical Titanosilicate-1 Zeolites by an Alkali-Etching Protocol and Their Enhanced Performance in Catalytic Oxidative Desulphurization of Fuels

Mesoporous Adsorbents for Desulfurization of Model Diesel Fuel: Optimization, Kinetic, and Thermodynamic Studies

Nanoization characteristics and photocatalytic degradation performance of deactivated SCR catalysts containing TiO 2

Preparation of Adsorptive TiO2/SiO2 Core-Shell Nanospheres by Ultrasonic-Coupled Alkali Leaching Process: Synergy of Adsorption and Photocatalysis Towards 2,4-Dinitrophenol Removal

2D/1D Graphitic Carbon Nitride/titanate Nanotubes Heterostructure for Efficient Photocatalysis of Sulfamethazine under Solar Light: Catalytic “hot Spots” at the Rutile–anatase–titanate Interfaces

Tunable TiO2-BN-Pd nanofibers by combining electrospinning and atomic layer deposition to enhance photodegradation of acetaminophen

Efficient and Selective Aerobic Oxidative Desulfurization of Petroleum Using Dy2Sn2O7 Supported by Ar-C3N4 on Nanofibrous Titanium as a Nanoceramic

In Situ Synthesis of TiO2-Doped Mesoporous Silica from Coal Fly Ash for the Photocatalytic Degradation of Dyes

Enhanced photocatalytic CO₂-reduction activity of electrospun mesoporous TiO₂ nanofibers by solvothermal treatment.

Sulfur and nitrogen doped -titanium dioxide coated on glass microspheres as a high performance catalyst for removal of naphthalene (C10H8) from aqueous environments using photo oxidation in the presence of visible and sunlight

Titanium dioxide modified nanosized TS-1 zeolite supported phosphotungstic acid as a catalyst for deep catalytic oxidative desulfurization of fuel oil

Preparation of adsorptive TiO 2 /SiO 2 core-shell nanospheres by ultrasonic-coupled alkali leaching process: Synergy of adsorption and photocatalysis towards 2,4-dinitrophenol removal

Controllable growth of silver nanoparticles on titanium dioxide/nitrogen-doped carbon nanofiber/molybdenum disulfide: Toward enhanced photocatalytic-activating peroxymonosulfate performance and "memory catalysis"