Biomechanical Research of Three Parallel Cannulated Compression Screws in Oblique Triangle Configuration for Fixation of Femoral Neck Unstable Fractures
Ru‐Yi Zhang,Wu‐Peng Zhang,Guang‐Min Yang,Dao‐Feng Wang,Peng Su,Yi Zhang,Shao‐Bo Nie,Jia Li,Zhe Zhao,Jian‐Tao Li,Li‐Cheng Zhang,Pei‐Fu Tang
DOI: https://doi.org/10.1111/os.14004
2024-02-23
Orthopaedic Surgery
Abstract:In this study, 20 fourth‐generation Sawbone femurs were used to evaluate the fixation mechanics of two screw space configurations (OTC triangle configuration and IETC inverted equilateral triangle configuration) for femoral neck fractures. During the experiment, static load test and cyclic load test were carried out on FNF specimens after internal screw fixation. The evaluation indexes of the static load test were axial stiffness, 5 mm failure load, ultimate load, shear displacement and front rotation angle of the two fragments. The cyclic loading test loads were 700N, 1400N, and 2100N, respectively, and the evaluation index was fracture end displacement. The study verified the mechanical advantages of OTC through in vitro biomechanical experiments, and to provide mechanical basis for its clinical application. Objective Surgical treatment with internal fixation, specifically percutaneous fixation with three cannulated compression screws (CCSs), is the preferred choice for young and middle‐aged patients. The mechanical advantage of the optimal spatial configuration with three screws provides maximum dispersion and cortical support. We suspect that the spatial proportion of the oblique triangle configuration (OTC) in the cross‐section of the femoral neck isthmus (FNI) may significantly improve shear and fatigue resistance of the fixed structure, thereby stabilizing the internal fixation system in femoral neck fracture (FNF). This study aims to explore the mechanical features of OTC and provide a mechanical basis for its clinical application. Methods Twenty Sawbone femurs were prepared as Pauwels type III FNF models and divided equally into two fixation groups: OTC and inverted equilateral triangle configuration (IETC). Three 7.3 mm diameter cannulated compression screws (CCSs) were used for fixation. The specimens of FNF after screw internal fixation were subjected to static loading and cyclic loading tests, respectively, with five specimens for each test. Axial stiffness, 5 mm failure load, ultimate load, shear displacement, and frontal rotational angle of two fragments were evaluated. In the cyclic loading test, the load sizes were 700 N, 1400 N, and 2100 N, respectively, and the fracture end displacement was recorded. Results were presented as means ± SD. Data with normal distributions were compared by the Student's t test. Results In the static loading test, the axial stiffness, ultimate load, shear displacement, and frontal rotational angle of two fragments were (738.64 vs. 620.74) N/mm, (2957.61 vs. 2643.06) N, (4.67 vs. 5.39) mm, and (4.01 vs. 5.52)° (p 0.05). Conclusion When three CCSs are inserted in parallel to fix FNF, the OTC of three screws has obvious biomechanical advantages, especially in shear resistance and early postoperative weight‐bearing, which provides a mechanical basis for clinical selection of ideal spatial configuration for unstable FNF.
orthopedics