Study on Hydrothermal Arsenic Fixation in H3AsO4-FeSO4-Na2SO4-H2O System
Jinsong Luo,Changwen Li,Cunxiong Li,Qiliang Wang,Ge Deng,Yiping Hu,Chengxi Xiang,Kefeng Ye
DOI: https://doi.org/10.1080/10584587.2024.2325879
2024-10-29
Integrated Ferroelectrics
Abstract:In this study, hydrothermal metallurgy technology was used to convert arsenic in the solution into a stable, dense, and granular arsenic-fixing mineral, scorodite (FeAsO 4 ·2H 2 O), that is conducive to storage. The effect of Na + on the precipitation rate of arsenic and iron, the phase composition, and the transformation of arsenic residue during the mineralization and arsenic precipitation of hydrothermal scorodite in the H 3 AsO 4 -FeSO 4 -Na 2 SO 4 -H 2 O system were studied. The results show that Fe 3+ co-precipitates with As 5+ to form scorodite (FeAsO 4 ·2H 2 O). In the later stage of the reaction, Fe 3+ and Na + combine to precipitate in the form of sodium jarosite [NaFe 3 (SO 4 ) 2 (OH) 6 ]. Under the conditions of an initial Na + concentration of 10 g/L, an arsenic concentration of 10 g/L, a molar ratio of iron to arsenic of 1.5, a pH of 1, a reaction temperature of 160 °C, a stirring speed of 500 r/min, a reaction time of 3 h, and an oxygen partial pressure of 0.6 MPa, the precipitation rates of arsenic and iron were 98.2% and 93.2%, respectively. The phase composition of the arsenic residue is mainly composed of large-grained polyhedral crystal scorodite, and a small amount of irregular, small-grained crystal sodium jarosite is dispersed in it. By controlling the initial molar ratio of iron to arsenic, the concentration of Na + , and prolonging the reaction time, the formation of the sodium jarosite phase can be inhibited, and the transformation of the sodium jarosite phase into the scorodite phase can be promoted, so as to realize the efficient precipitation of arsenic, reduce the amount of arsenic residue, ensure the stability of arsenic residue, and avoid potential environmental pollution risks.
engineering, electrical & electronic,physics, condensed matter, applied