Abstract:Here, a FeS/C yolk‐shell structure is fabricated to alleviate volume expansion during sodiation and improve electrical conductivity of FeS, thus enhancing cycling and rate performances. Remarkably, in situ magnetometry confirms that superparamagnetic Fe conversion induces evolution of electrode magnetization between 0.01 and 1 V, during which spin‐polarized surface capacitance effect occurs to increase extra ion storage and boost ion transport stably. Iron sulfide (FeS) has been extensively studied as sodium‐ion battery anodes due to its high theoretical capacity (609 mAh g−1), but its large volume expansion and low electrical conductivity result in unsatisfactory cycling life and poor rate performance. Moreover, the sodium ion storage mechanism of FeS at a voltage range of 0.01–1 V involving conversion reactions and subsequent ion storage process is unclear yet. Here, the study proposes a vapor‐pressure induced synthesis route to fabricate FeS/C yolk‐shell structure that ultrathin carbon layers coat on the surface of FeS nanosheets, which can accommodate volume expansion of FeS during sodiation observed via in situ transmission electron microscope and improve its electrical conductivity. Remarkably, an in situ magnetometry reveals that vast spin‐polarized electrons can be injected into superparamagnetic Fe nanoparticles (≈3 nm) formed during conversion reaction to induce evolution of electrode magnetization between 0.01 and 1 V, during which spin‐polarized surface capacitance effect occurs at Fe/Na2S interfaces to increase extra ion storage and boost ion transport stably. Consequently, the FeS/C yolk‐shell nanosheets deliver a high reversible capacity of 664.9 mAh g−1 at 0.1 A g−1, and 300.4 mAh g−1 after 10 000 cycles at 10 A g−1 with a capacity retention of 81.1%.

Innovative synthesis and comprehensive electrochemical evaluation of FeVO 4 for enhanced sodium-ion battery performance

Nanoarchitectured Fe3C@N‐Doped C/FeVO4 as High‐Performance Anode for Sodium‐Ion Batteries

A Scalable Strategy to Develop Advanced Anode for Sodium-Ion Batteries: Commercial Fe3O4-Derived Fe3O4@FeS with Superior Full-Cell Performance.

Fe 2 VO 4 Nanoparticles Anchored on Ordered Mesoporous Carbon with Pseudocapacitive Behaviors for Efficient Sodium Storage

F and Si Dual-Doping Induced Oxygen Vacancies in a Na4Fe3(PO4)2P2O7 Cathode Enables Boosting Electrochemical Performance for Sodium Storage

Scalable synthesis of mesoporous FeS2 nanorods as high-performance anode materials for sodium-ion batteries

FeS2 Nanoparticles Embedded in N/S Co-Doped Porous Carbon Fibers As Anode for Sodium-Ion Batteries

Porous Amorphous FePO4 Nanoparticles Connected by Single-Wall Carbon Nanotubes for Sodium Ion Battery Cathodes

Exploration of amorphous hollow FeOOH@C nanosphere on energy storage for sodium ion batteries

Fast and Reversible Na Intercalation in Nsutite‐Type VO2 Hierarchitectures

Preparation and Electrochemical Performance of Porous alpha-Fe2O3 Nanospheres Anode Materials for Na-Ion Batteries

FeO0.7F1.3/C Nanocomposite As a High‐Capacity Cathode Material for Sodium‐Ion Batteries

Electrochemically incorporated Cu nanoparticles in NaVO3 with enhanced sodium-ion battery performance

A Scalable Approach to Na 2 FeP 2 O 7 @Carbon/Expanded Graphite as a Low‐Cost and High‐Performance Cathode for Sodium‐Ion Batteries

Encapsulating Highly Crystallized Mesoporous Fe3O4 in Hollow N-doped Carbon Nanospheres for High-Capacity Long-Life Sodium-Ion Batteries

Synthesis and Modification of FeVO 4 As Novel Anode for Lithium-Ion Batteries

Na ions doped Fe2VO4 cathode for high performance aqueous zinc‐ion batteries

Yolk‐Shell Structure and Spin‐Polarized Surface Capacitance Enable FeS Stable and Fast Ion Transport in Sodium‐Ion Batteries

Sodium‐Ion Batteries: FeO0.7F1.3/C Nanocomposite as a High‐Capacity Cathode Material for Sodium‐Ion Batteries (Adv. Funct. Mater. 5/2015)

Electronic structure regulation of Na2FePO4F cathode toward superior high-rate and high-temperature sodium-ion batteries

MOF‐Derived Fe 7 S 8 Nanoparticles/N‐Doped Carbon Nanofibers as an Ultra‐Stable Anode for Sodium‐Ion Batteries