Abstract:The sol-gel route was used to synthesize a biophenolic resin from a blend of Kraft black liquor and condensed tannin. The biobased resin has an amorphous structure and diversified surface functional groups. The biomaterial thermal stability was improved by Kraft black liquor, which increased the fixed carbon yield by 19.78% in an oxidant medium and 9.07% in an inert medium. Moreover, the presence of fixed carbon and char is positively related to the material flame retardant property. Additionally, impedance measurements were used to understand the physical phenomena occurring at the polymeric matrix's interface and the material's final properties. The biobased resin characterization and the considerable increase in the presence of micropollutants in surface and water bodies suggest the new biomaterial application in the adsorption process. Thus, its adsorption capacity toward several organic and inorganic micropollutants and its effectiveness in complex water matrices were evaluated. Methylene blue was used as a model compound to assess the influence of the resin composition on the adsorption capacity, and the type H isotherm indicates the high affinity of the biobased resin toward the micropollutant. The adsorption occurs in multilayer by intermolecular interaction and electrostatic forces. The amount of Kraft black liquor favored the adsorption, and the adsorption capacity was greater than 1250 mg g-1. When inorganic compounds were evaluated, the carboxyl and phenol groups favor the biomaterial affinity toward metal ions. Cu2+ and Ni2+ were completely removed from the contaminated water, and the adsorption capacity of the other inorganic compounds was: Pb2+ (36.97 mg g-1), Al3+ (22.17 mg g-1), Ba2+ (12.76 mg g-1), Ag1+ (33.85 mg g-1), and Fe2+ (19.44 mg g-1). In contrast, the adsorption capacity of the organic micropollutants was: 2,4-D (3.09 mg g-1), diuron (5.89 mg g-1), atrazine (2.71 mg g-1), diclofenac (2.04 mg g-1), caffeine (5.79 mg g-1), acetaminophen (4.80 mg g-1), methylene Blue (106.66 mg g-1), and methyl orange (30.48 mg g-1). The results pointed that the adsorption efficiency of organic micropollutants increases with the distribution coefficient (logD), indicating the biobased resin affinity toward more lipophilic compounds and ionized species.

Investigating the thermal cure behavior of sorbitol-derived biobased melamine–formaldehyde impregnation resins using DSC and FTIR analysis

Novel Silicon-Modified Phenolic Novolac Resins: Non-isothermal Curing Kinetics, and Mechanical and Thermal Properties of Their Biofiber-Reinforced Composites

Mechanical and Water Soaking Properties of Medium Density Fiberboard with Wood Fiber and Soybean Protein Adhesive.

Silicone-modified Phenolic Resin: Relationships Between Molecular Structure and Curing Behavior

Studies on Cure Kinetics of Diglycidyl Ether of 4,4′-Bisphenol/4,4′-diaminobiphenyl Using the Advanced Isoconversional Method

Prediction of Residual Curing Capacity of Melamine-Formaldehyde Resins at an Early Stage of Synthesis by In-Line FTIR Spectroscopy

Esterification of wood with citric acid and sorbitol: effect of the copolymer on the properties of the modified wood. Part 1: macroscopic changes, fixation of chemicals and impact bending properties

Synthesis of a biobased resin and its screening as an alternative adsorbent for organic and inorganic micropollutant removal

Investigations of the Chemical Distribution in Sorbitol and Citric Acid (SorCA) Treated Wood—Development of a Quality Control Method on the Basis of Electromagnetic Radiation

Elucidating the Role of Lignin Type and Functionality in the Development of High-Performance Biobased Phenolic Thermoset Resins

Preparation of a nano-silica modified melamine formaldehyde resin

Photocuring behavior of low molecular weight biomass-derived methacrylate monomers for paper coatings

Impact Of Lignin Source On The Performance Of Thermoset Resins

Toughening and Enhancing Melamine-Urea-Formaldehyde Resin Properties via in situ Polymerization of Dialdehyde Starch and Microphase Separation

Influence of Single/Collective Use of Curing Agents on the Curing Behavior and Bond Strength of Soy Protein-Melamine-Urea-Formaldehyde (SMUF) Resin for Plywood Assembly

Photocuring of Epoxidized Cardanol for Biobased Composites with Microfibrillated Cellulose

Bio-based adhesive derived from citric acid and sorbitol for wood-composite manufacture

Curing characteristics of low molecular weight melamine-urea–formaldehyde (MUF) resin-impregnated poplar wood

Optimizing biobased thermoset resins by incorporating cinnamon derivative into acrylated epoxidized soybean oil

Sugarcane bagasse for sustainable development of thermoset biocomposites

Bis-EMA/Bis-GMA ratio effects on resin-properties and impregnated fiber-bundles