Abstract:Over the past decade, lidars have become a cornerstone of robotics state estimation and perception thanks to their ability to provide accurate geometric information about their surroundings in the form of 3D scans. Unfortunately, most of nowadays lidars do not take snapshots of the environment but sweep the environment over a period of time (typically around 100 ms). Such a rolling-shutter-like mechanism introduces motion distortion into the collected lidar scan, thus hindering downstream perception applications. In this paper, we present a novel method for motion distortion correction of lidar data by tightly coupling lidar with Inertial Measurement Unit (IMU) data. The motivation of this work is a map-free dynamic object detection based on lidar. The proposed lidar data undistortion method relies on continuous preintegrated of IMU measurements that allow parameterising the sensors' continuous 6-DoF trajectory using solely eleven discrete state variables (biases, initial velocity, and gravity direction). The undistortion consists of feature-based distance minimisation of point-to-line and point-to-plane residuals in a non-linear least-square formulation. Given undistorted geometric data over a short temporal window, the proposed pipeline computes the spatiotemporal normal vector of each of the lidar points. The temporal component of the normals is a proxy for the corresponding point's velocity, therefore allowing for learning-free dynamic object classification without the need for registration in a global reference frame. We demonstrate the soundness of the proposed method and its different components using public datasets and compare them with state-of-the-art lidar-inertial state estimation and dynamic object detection algorithms.

A Depth-Buffer-Based Lidar Model With Surface Normal Estimation

Modeling of Motion Distortion Effect of Scanning LiDAR Sensors for Simulation-Based Testing

Extended Target Tracking With a Lidar Sensor Using Random Matrices and a Virtual Measurement Model

Physical LiDAR Simulation in Real-Time Engine

Measuring the Influence of Environmental Conditions on Automotive Lidar Sensors

3D Reconstruction & Assessment Framework based on affordable 2D Lidar

Deep Depth Estimation from Visual-Inertial SLAM

GAN-Based LiDAR Intensity Simulation

Guided Direct Time-of-Flight Lidar Using Stereo Cameras for Enhanced Laser Power Efficiency

Simulating Road Spray Effects in Automotive Lidar Sensor Models

On Enhancing Ground Surface Detection from Sparse Lidar Point Cloud

Learning to Simulate Realistic LiDARs

Full-Waveform Modeling for Time-of-Flight Measurements based on Arrival Time of Photons

Lidar-Based Mobile Mapping System for an Indoor Environment

Real-Time Truly-Coupled Lidar-Inertial Motion Correction and Spatiotemporal Dynamic Object Detection

Software-Defined Active LiDARs for Autonomous Driving: A Parallel Intelligence-Based Adaptive Model

LiMOX—A Point Cloud Lidar Model Toolbox Based on NVIDIA OptiX Ray Tracing Engine

3D imaging model of airborne LiDAR system

A Multi-Layered Approach for Measuring the Simulation-to-Reality Gap of Radar Perception for Autonomous Driving

LiDAR-GS:Real-time LiDAR Re-Simulation using Gaussian Splatting

AdaSplats: Adaptive Splatting of Point Clouds for Accurate 3D Modeling and Real-time High-Fidelity LiDAR Simulation