Abstract:One of the most important objectives in biomaterials science is the development of new materials for bone substitution. It has been found that hydroxyapatite (HAp), which is the most widely studied bioceramic, has an excellent biocompatibility and a certain degree of bioactivity [1, 2]. However, HAp is limited in its use because it is brittle compared with natural bone. In order to improve the toughness and bioactivity of bone substitution materials, biocomposites made of HAp and biocompatible organic components or bioactive glass have been developed in recent years [3-10]. Among these materials, HAp/collagen composite is of special interest because it mimics the composition of natural bone [7-10]. Preliminary study reveals that this composite has a better osteo-inductive capacity in cell culture than monolithic HAp [9]. So far, HAp/collagen composite is still at the initial stage of development. It is well known that HAp is nanometre sized and deposits in an orderly way on the collagen matrix in natural bone. However, with the synthetic methods reported, it is not easy to obtain either a uniformly mixed composite [7], or a fine crystal sized material [8-10], while these two factors are important to the bioactivity of the composite [2]. Therefore, new methods are needed to obtain an HAp/collagen composite which mimics not only the composition but also the microstructure of natural bone. This letter reports a new preparation method of HAp/ collagen composite in which nanometre sized HAp is homogeneously dispersed in collagen matrix. The results of biological testing will be published separately. Commercially purchased HAp powder and type 1 insoluble collagen from bovine achilles tendon were used as starting materials. Firstly, i g HAp was dissolved in 150 ml, 0.1 N HC1 at 20 °C and 450 mg type i collagen was added to the solution, which was then ultra-sonicated, using a Model Gl125 ultrasonator, until a thoroughly mixed slurry was obtained. Secondly, this solution was diluted to 2000 ml with distilled water, and 23.376 g NaC1 was added to increase the stability of the calcium containing solution [11]. This resulted in a 5 mM calcium solution with pH 3.0. At the third step, the solution was gently stirred at 20 °C, and 0.05 M potassium hydroxide solution was added in drops to the calcium solution to adjust the pH to 7.4. When the pH exceeded about 7.0, the solution became supersaturated and HAp started to precipitate onto the collagen. The solution was maintained at pH 7.4 for 10 min, after which the composite was harvested by centrifugation at 5000 rpm and freeze-dried. The

Protein-SiO_2 organic-inorganic nano-hybrid for new collagen materials

Production and characterization of a silk-like hybrid protein, based on the polyalanine region of Samia cynthia ricini silk fibroin and a cell adhesive region derived from fibronectin.

Control of silicification by genetically engineered fusion proteins: silk-silica binding peptides.

Synthesis of mesoporous silica material with hydrophobic external surface and hydrophilic internal surface for protein adsorption

Preparation and Characterization of Grafted Collagen Confined in Mesoporous Silica

Silica precipitation by synthetic minicollagens

In-situ hybridization of calcium silicate and hydroxyapatite-gelatin nanocomposites enhances physical property and in vitro osteogenesis

Structure and Properties of Various Hybrids Fabricated by Silk Nanofibrils and Nanohydroxyapatite.

Si-doping bone composite based on protein template-mediated assembly for enhancing bone regeneration

Novel sulfonated calixarenes derived crosslinker for reinforcing and toughening collagen: Relevance between structure and properties

Al2O3/SnO2 Co-Nanoparticle Modified Grafted Collagen for Improving Thermal Stability and Infrared Emissivity

Doping bioactive elements into a collagen scaffold based on synchronous self-assembly/mineralization for bone tissue engineering

Biomimetic Silk Fibroin Hydrogels Strengthened by Silica Nanoparticles Distributed Nanofibers Facilitate Bone Repair

Morphological Characterization and Chemical Bond Identification of Collagen-coated Native Silk Fibroin Fibers Using Chemical Method

Self-assembly of collagen fibrils on graphene oxide and their hybrid nanocomposite films

Synthesis of nanophase hydroxyapatite/collagen composite

Composite Material Made of Regenerated Silk Fibroin and Silica Sol

Porous Gelatin-Siloxane Hybrid Scaffolds with Biomimetic Structure and Properties for Bone Tissue Regeneration

Nanofibrous gelatin–silica hybrid scaffolds mimicking the native extracellular matrix (ECM) using thermally induced phase separation

Effect of the silica nanoparticle size on the osteoinduction of biomineralized silk-silica nanocomposites

(Ti,sn)o-2 Solid Solution Self-Aligned into "sandwich" Array on Grafted Modification Collagen Matrix