Abstract:Similitude theory provides the necessary conditions to predict the structural responses of the full-scale prototype through the scaled model, and is widely used in full-scale experiments of large structures. However, the prediction accuracy is insufficient in partial similitude. Aiming at this issue, this paper proposes the frequency adjustment laws to predict vibration responses of full-scale rotor in non-resonant state, since the rotating machinery usually works in non-resonant state. On this basis, a partial similitude method is presented by combining the frequency adjustment laws with the current method. The proposed method provides several scaling laws in the whole range of rotating speed, while only one scaling factor is used to predict the vibration responses in existing methods. The accuracy of the proposed method is verified by the numerical and experimental case studies, where the geometrical distortion is considered. In the numerical case study, the scaling laws of a rotor system are obtained by the proposed method and existing methods. The predicted results of the proposed method are compared with those of the existing methods. It is found the proposed method accurately predicts the displacements and accelerations of prototypes through those of scaled model. Moreover, the proposed method achieves a higher accuracy. The experimental study carries out the testing for the prototype and model test rigs. The experimental results show that the proposed method provides better results in predicting the displacement and acceleration compared with the existing methods. The proposed method allows designers to design a scaled model and to reproduce the vibratory behavior of the full-size prototype, which reduces the difficulty, costs and time of experimental test. Moreover, the proposed partial similitude method has a better performance than the existing methods.

Structure similitude for a nonlinear rotor system with connected Geislinger coupling

Modeling a Two-Span Rotor System Based on the Hamilton Principle and Rotor Dynamic Behavior Analysis

A partial similitude method considering variable powers in scaling laws and applied to rotor-bearing systems

A partial similitude method for vibration responses of rotor systems: Numerical and experimental verification

Similitude for the Dynamic Characteristics of Dual-Rotor System with Bolted Joints

Analytical modeling of the lateral stiffness of a spline coupling considering teeth engagement and influence on rotor dynamics

Study on Power Flow Characteristics of the System with Rotating Substructure

Modeling and dynamic analysis for rotors with curvic-coupling looseness

Partial similitude for dynamic characteristics of rotor systems considering gravitational acceleration

Nonlinear Dynamic Analysis for a Jeffcott Rotor Considering Varying Connection Stiffness of Bolted Joint

Nonlinear Dynamics of Two-span Rotor-bearing System with Flexible Coupling Misalignment

Dynamic characteristics of rotor system with parallel and angular misaligned involute spline coupling

Study on the influence of joint parameters on nonlinear dynamics of a rotor system

An improved partial similitude method for dynamic characteristic of rotor systems based on Levenberg–Marquardt method

Nonlinear Modeling and Vibration Response Analysis of a Dual-Rotor System with an Inter-Shaft Graphite Seal

The coupled bending-torsional dynamic behavior in the rotating machinery: modeling, simulation and experiment validation

Dynamic modeling of GTF star gear-rotor coupling system considering structural flexibility

Nonlinear Dynamic Modeling of a Simple Flexible Rotor System Subjected to Time-Variable Base Motions

Nonlinear vibrations of a dual-rotor-bearing-coupling misalignment system with blade-casing rubbing

Study on the nonlinear structural coupling for wind turbine blade under large deflections by using novel finite difference method

Coupled Bending and Torsional Vibrations of Geared Rotor System