Abstract:Torpedo anchors represent a promisingly innovative anchorage foundation for deep water applications due to their efficient and economical installation. During installation, a significant length of mooring chain was embedded into the seabed alongside the torpedo anchor. This interaction between the chain and the soil alters the strength characteristics of the clay, and also affect the loading angle at the padeye during pullout. As a result, the bearing capacity of the torpedo anchor is influenced by the movement of the chain. However, existing numerical studies lack a comprehensive understanding of the pullout performance of torpedo anchors, particularly in considering the presence of mooring chains. This study endeavors to investigate the pullout capacity of torpedo anchors in clay, accounting for the effect of the mooring chain attached to the padeye, utilizing the large deformation finite element method (LDFE). The elastic-perfectly plastic material model, adhering to the modified Tresca yield criterion, was employed. Verification of the model's accuracy and effectiveness was conducted through centrifuge test results. The influence of the mooring chain and loading angle on the pullout capacity were investigated. The findings indicate that the discrepancy in the bearing capacity of torpedo anchors, with and without considering the mooring chain, increases from 3% to 38.4% as the loading angle rises from 0 degrees to 75 degrees. Conversely, for vertical loading, the difference decreases to 7%. Based on the numerical analysis, normalized V-H envelopes were provided. This work contributes valuable insights into the capacity of torpedo anchors.

Installation performance of torpedo anchor at different installation heights under the action of currents: The example of T98 torpedo anchor

Free-Fall Penetration Behaviors of A New Dynamically Installed Plate Anchor in Marine Clay

Dynamic Installation Behaviors of A New Hybrid Plate Anchor in Layered Marine Clay

A case study on the seabed trenching assessment and anchor design in clay based on the hydrodynamic calculation of the floater

The Installation Behavior and Capacity of Piggy-Backed Anchors for Offshore Wind Turbine

Numerical Investigations on the Installation of Dynamically Installed Anchors with Attached Mooring Line

A Study on Offshore Anchor Selection with a Focus on Torpedo Anchor Stability and Performance

Penetration Depth of Torpedo Anchor in Cohesive Soil by Free Fall

Numerical investigations into the influence of geometric configurations on hydrodynamic characteristics of torpedo anchors

Centrifuge Modelling of Suction Anchor Subjected to Inclined Load in Soft Clay

A Framework for Mooring and Anchor Design in Sand Considering Seabed Trenches Based on Floater Hydrodynamics

Vibration Behavior Analysis of Anchor Cables in Submerged Floating Tunnel and Its Application

The Bearing Capacity of Torpedo Anchor in Clay under Inclined Loading of Mooring Chain

Numerical modelling on anchor-soil-water interaction for dynamic installation of gravity installed anchors

Vertical Holding Capacity of Torpedo Anchors in Underwater Cohesive Soils

Recent Advances in Research of New Deepwater Anchor Foundations

On the estimation of the falling velocity and drag coefficient of torpedo anchor during acceleration

Preliminary tests on the terminal velocity of a torpedo anchor in still water

Numerical Investigations on Pore-Pressure Response of Suction Anchors under Cyclic Tensile Loadings

Review on Seabed Trenches Induced by Mooring Lines and Analyses of Anchor Bearing Capacity

A study on the falling velocity of torpedo anchors during acceleration