Abstract:This article introduces a novel, single‐layer, low‐profile, circularly polarized metasurface antenna. Through characteristic mode analysis, the optimization of a 3× 3 rectangular metasurface structure was performed. Two orthogonal modes were selected as the operating modes, and improvements to the metasurface structure were made to achieve a 90∘ phase difference between these modes. The adoption of a coplanar waveguide structure enables the excitation of the metasurface, facilitating circularly polarized radiation performance for the two selected modes. The antenna's dimensions are 40 mm × 40 mm × 3 mm, featuring a −10 dB impedance bandwidth of 27.8% (4.49–5.94 GHz). The 3 dB axial ratio bandwidth is 14.2% (5.25–6.05 GHz), with a maximum gain of 7.26 dBi. This article introduces a novel, single‐layer, low‐profile, circularly polarized metasurface antenna. Through characteristic mode analysis, the optimization of a 3× 3 rectangular metasurface structure was performed. Two orthogonal modes were selected as the operating modes, and improvements to the metasurface structure were made to achieve a 90∘ phase difference between these modes. The adoption of a coplanar waveguide structure enables the excitation of the metasurface, facilitating circularly polarized radiation performance for the two selected modes. The antenna's dimensions are 40 mm × 40 mm × 3 mm (0.67 λ × 0.67 λ × 0.05 λ ), featuring a −10 dB impedance bandwidth of 27.8% (4.49–5.94 GHz). The 3 dB axial ratio bandwidth is 14.2% (5.25–6.05 GHz), with a maximum gain of 7.26 dBi.

Circularly polarized metasurface antenna based on characteristic mode analysis for microwave energy harvesting

Phase-tuning Metasurface for Circularly Polarized Broadside Radiation in Broadband

Polarization-Tunable Microstrip Antenna Based on Double V-Type Metamaterials Cover for Microwave Energy Harvesting

Compact circularly polarized metasurface antenna based on characteristic mode analysis

Metasurface: Enhancing Gain of Antenna and Energy Harvesting System Design

A multi-frequency and multi-mode metasurface energy harvester for RF energy harvesting

A Dual-Band, Polarization-Insensitive, Wide-Angle Metasurface Array for Electromagnetic Energy Harvesting and Wireless Power Transfer

A metasurface-inspired printed monopole antenna for 5G and RF energy harvesting application

Tri-band miniaturized wide-angle and polarization-insensitive metasurface for ambient energy harvesting

Metasurface: Changing Polarization from Linear to Circular for Airborne Antenna

Circular Polarized Antenna for Radio Frequency Energy Harvesting Applications in the Smart Cities

Low-Profile Wideband Dual-Circularly Polarized Metasurface Antenna Based on Traveling-wave Sequential Feeding Mechanism

A wide-angle incidence, broadband rectified metasurface for radar frequency band EM energy harvesting and wireless power transfer

Metasurface‐based circularly polarised antenna: Enhanced bandwidth with characteristic mode analysis and symmetric branch design

Wideband High Efficiency and Simple-Structured Rectifying Metasurface

A Scalable, Wide-Angle Metasurface Array for Electromagnetic Energy Harvesting

High gain and circularly polarized substrate integrated waveguide cavity antenna array based on metasurface

A Low-Profile Wideband Linear-to-Circular Polarization Conversion Slot Antenna Using Metasurface

Wideband metasurface-loaded rectenna for azimuth-insensitive electromagnetic energy absorption using characteristic mode analysis

A Broadband Low-Profile Dual-Linearly Polarized Dipole-Driven Metasurface Antenna

Utilizing characteristics mode analysis for designing a miniaturised high-gain metasurface antenna with wideband circular polarization and reduced scattering