Abstract:A novel microfibrous composite bed reactor was developed and was demonstrated for high efficiency hydrogen production by the decomposition of ammonia at moderate temperatures in portable fuel cell power system applications. By using a high-speed and low-cost papermaking technology combined with a subsequent sintering process, sinter-locked three-dimensional microfibrous networks consisting of similar to 3 vol% 8 mm (dia.) nickel microfibers were utilized to entrap similar to 35 vol% 100-200 mu m dia. porous Al2O3 support particulates. A CeO2 promoter and active Ni component were then dispersed onto the pore surface of the entrapped Al2O3 support particulates by a stepwise incipient wetness impregnation method. The microfibrous structure took advantage of a large void volume, entirely open structure, high heat/mass transfer, high permeability, good thermal stability, and unique form factors. Addition of ceria significantly promoted the low-temperature activity of Ni/Al2O3 catalyst particulates incorporated into the micorfibrous structure. The use of fine particles of catalyst significantly attenuated the intraparticle mass transport limitations. As a result, the present novel microfibrous composite bed reactor provided excellent activity and structure stability in ammonia decomposition, as well as low pressure drop and high efficiency reactor design. At a 90% conversion of a 145 sccm ammonia feed rate, the microfibrous entrapped Ni/CeO2-Al2O3 catalyst composite bed could provide a 4-fold reduction of catalytic bed volume and a 5-fold reduction of catalytic bed weight (or 9-fold reduction of catalyst dosage), while leading to a reduction of reaction temperature of 100 degrees C, compared to a packed bed with 2 mm dia. Ni/CeO2-Al2O3 catalyst pellets. This composite bed was capable of producing roughly 22 W of hydrogen power, with an ammonia conversion of 99% at 600 degrees C in a bed volume of 0.5 cm(3) throughout a 100 h continuous test. These initial and promising results established that the microfibrous nickel-based catalyst composites were effective for high efficiency production of hydrogen by ammonia decomposition, while achieving a significant reduction of overall catalytic bed weight and volume. We anticipate our assay to be a new point for small-scale hydrogen production, where the microfibrous catalytic reactors considered in isolation can satisfy several of the most fundamental criteria needed for useful operation.

Development of a Pd-Ag H2-selective membrane microchannel reactor for efficient solar hydrogen production with ammonia

Solar-driven multichannel membrane reactor for hydrogen production from ammonia decomposition

Numerical analysis on ammonia decomposition for hydrogen production in a membrane reactor assisted by a parabolic trough solar collector

Kinetic and thermodynamic analyses of mid/low-temperature ammonia decomposition in solar-driven hydrogen permeation membrane reactor

An Innovative Micro-Channel Catalyst Support with a Micro-Porous Surface for Hydrogen Production Via Methanol Steam Reforming

Performance Analysis of a Solar Heating Ammonia Decomposition Membrane Reactor under Co-Current Sweep

H2 production via ammonia decomposition in a catalytic membrane reactor

Metallic Supported Pd-Ag Membranes for Simultaneous Ammonia Decomposition and H2 Separation in a Membrane Reactor: Experimental Proof of Concept

Carbon Molecular Sieve Membrane Reactors for Ammonia Cracking

Multiple-objective optimization on ammonia decomposition using membrane reactor

Performance of a Novel Single-Tubular Ammonia-Based Reactor Driven by Concentrated Solar Power

A Micro-Reactor with Micro-Pin-fin Arrays for Hydrogen Production Via Methanol Steam Reforming

Theoretical Analysis of a Solar Membrane Reactor with Enhanced Mass Transfer by Using Helical Inserts

Effect of Hydrogen Permeation and Operating Parameters on Thermochemical Performance of Solar-Driven Steam Methane Reforming Membrane Reactor

A mid/low-temperature solar-driven integrated membrane reactor for the dehydrogenation of propane – A thermodynamic assessment

Novel microfibrous composite bed reactor: high efficiency H2 production from NH3 with potential for portable fuel cell power supplies.

Ammonia Decomposition Coupled with Methane Combustion in Catalytic Microreactors for Hydrogen Production

Development of a Double-Helical Thermal Matching Reactor for Enhanced Solar Green Hydrogen Production

Efficient distributed concentrating solar power system with ammonia-based chemical heat pump

Effect of Operating and Geometrical Parameters on Ammonia Decomposition in a Tubular Reactor Driven by Concentrating Solar Power

Advancements in Thermocatalytic Ammonia Decomposition for Hydrogen Production