Mechanics and microstructure of blood plasma clots in shear driven rupture

Ranjini K. Ramanujam,Konstantinos Garyfallogiannis,Rustem Litvinov,John Bassani,John W Weisel,Prashant Kishore Purohit,Valerie Tutwiler

DOI: https://doi.org/10.1039/d4sm00042k

IF: 4.046

2024-04-28

Soft Matter

Abstract:Intravascular blood clots are subject to hydrodynamic shear and other forces that cause clot deformation and rupture (embolization). A portion of the ruptured clot can block blood flow in downstream vessels. The mechanical stability of blood clots is determined primarily by the 3D polymeric fibrin network that forms a gel. Previous studies have primarily focused on the rupture of blood plasma clots under tensile loading (Mode I), our current study investigates the rupture of fibrin induced by shear loading (Mode II), dominating under physiological conditions induced by blood flow. Using experimental and theoretical approaches, we show that fracture toughness, i.e. the critical energy release rate, is relatively independent of the type of loading and is therefore a fundamental property of the gel. Ultrastructural studies and finite element simulations demonstrate that cracks propagate perpendicular to the direction of maximum stretch at the crack tip. These observations indicate that locally, the mechanism of rupture is predominantly tensile. Knowledge gained from this study will aid in the development of methods for prediction/prevention of thrombotic embolization. Keywords: Blood clotting, fibrin, biomechanics, fracture

polymer science,chemistry, physical,materials science, multidisciplinary,physics

What problem does this paper attempt to address?

The key problem that this paper attempts to solve is to understand the rupture mechanism of plasma clots under shear loading, especially the rupture behavior related to the shear stress under physiological conditions caused by blood flow. Specifically, the research focuses on the following aspects:

1. **Fracture Toughness of Plasma Clots under Shear Loading**: Previous studies mainly focused on the rupture behavior of plasma clots under tensile loading (Mode I), while this study explores the influence of shear loading (Mode II) on plasma clots. Through experiments and theoretical simulations, the authors found that the fracture toughness (i.e., the critical energy release rate \( G_c \)) is relatively independent of the loading type and is therefore a fundamental property of the gel.

2. **Crack Propagation Direction**: Ultrastructural studies and finite - element simulations indicate that cracks propagate in the direction of maximum tensile stress. This shows that the local rupture mechanism is mainly tensile, even under shear loading.

3. **Relationship between Fiber Alignment and Fracture Toughness**: Statistical modeling reveals the relationship between the characteristic strain of fiber alignment and fracture toughness, which controls the rupture resistance of plasma clots. The study shows that changing the fibrinogen concentration in plasma and the ultrastructure of fibrin directly affects the rupture resistance of thrombi.

4. **Improvement of Mechanical Model**: In order to better simulate the behavior of fibers in a compressed state, the authors modified the previous material model by introducing a non - zero compressive stiffness to more accurately describe the response of fibers under different stress states.

### Formula Summary

- **Cauchy Stress Formula**:
\[
\sigma(\mathbf{F}, \mu) = \phi_{\text{ref}}^s I_3 \left[ G(\mathbf{B} - \alpha_1 \mathbf{I}) + 2 \sum_{p = 1}^N g(E_p) \mathbf{h}_p \right] - (\pi + \mu) \mathbf{I}
\]
where \(\phi_{\text{ref}}^s\) is the initial solid volume fraction, \(\mathbf{F}\) is the deformation gradient, \(\mu\) is the chemical potential, and \(G\) and \(g(E_p)\) are the stress - strain response functions respectively.

- **Critical Energy Release Rate \( G_c \)**:
\[
G_c = -\frac{1}{t} \left. \frac{\partial \Phi(\Delta, a)}{\partial a} \right|_{\Delta = \Delta_c}
\]
where \(\Delta_c\) is the critical displacement, \(\Phi\) is the total energy of the system, \(a\) is the crack length, and \(t\) is the initial thickness of the specimen.

These research results are helpful for predicting and preventing the occurrence of thromboembolism, especially in pathological conditions such as deep vein thrombosis (DVT), where thrombus detachment may lead to blood flow blockage in important organs.