Abstract:Introducing two-dimensional (2D) conjugated structures to polymers is a feasible way for the design of functionalized polymers due to their good planarity, high electron/hole mobility, thermal stabilities, and so forth. However, the current development of thermoelectric polymers is mainly restricted to the limited modification of the one-dimensional conjugated polymers. Herein, a novel donor–acceptor based 2D conjugated polymer, P(BDTTT-DPP), was designed and synthesized for the enhancement of thermoelectric properties. Compared to the one-dimensional conjugated polymer P(BDT-DPP), P(BDTTT-DPP) showed a higher doping level when doped with the p-type FeCl3 dopant. After doping with 20 mg/mL FeCl3 for 15 min, the optimal power factor of P(BDTTT-DPP) was obtained to be 6.50 μW m–1 K–2 at room temperature, which is 26 times higher than that of P(BDT-DPP). The studies of film morphology and packing structure analysis further indicated that the π–π stacking (010) distance of P(BDTTT-DPP) was maintained after the doping process, and the longer lamellar stacking distance allowed the FeCl3 dopants to efficiently incorporate between the lamellar domains compared to that of P(BDT-DPP), which is favorable to the crystallinity and electron transferability. The results of our work provide valuable insights into the development of donor–acceptor based 2D conjugated polymer for high-performance organic thermoelectric materials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00274?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00274</a>.Details of materials and experimental sections; instruments and measurements; 1H NMR spectrum of P(BDTTT-DPP) and P(BDT-DPP); GPC of P(BDTTT-DPP) and P(BDT-DPP); TGA curves of P(BDTTT-DPP), P(BDT-DPP), doped P(BDTTT-DPP), and doped P(BDT-DPP); DSC curves of P(BDTTT-DPP) and P(BDT-DPP); cyclic voltammograms of ferrocene; UV–vis–NIR absorption spectra of the pristine and doped P(BDT-DPP); detail of solution and film preparation for UV–vis–NIR testing; TE performance of P(BDT-DPP) films with a doping concentration of 20 mg/mL FeCl3 at different doping times at room temperature; SEM cross-sectional images of pristine and doped polymers; AFM phase image and XRD spectra of pristine polymer films and doped polymer films; and d-spacing of π–π stacking and layer stacking for polymers (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00274/suppl_file/ae1c00274_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Balancing Solubility and Thermoelectric Performance in π-Extended Poly(benzimidazoanthradiisoquinolinedione) Ladder-Type Conjugated Polymer

Thermoelectric Performance Enhancement of p -Type Pyrrolo[3,2-b:4,5-b′]bis[1,4]benzothiazine Conjugated Ladder Polymer by Pendant Group Engineering

Tailoring P-N Conversion in All-solid-state Polymer Composites with A Record Ionic Thermopower

P- and N-Dopable Ambipolar Bulk Heterojunction Thermoelectrics Based on Ladder-Type Conjugated Polymers

Sequential Doping of Ladder-Type Conjugated Polymers for Thermally Stable n-Type Organic Conductors

High N-Type and P-Type Conductivities and Power Factors Achieved in a Single Conjugated Polymer

Photovoltaic performance of ladder-type indacenodithieno[3,2-b]thiophene-based polymers with alkoxyphenyl side chains

Cationic Conjugated Polymers with Enhanced Doped-State Planarity for N -Type Organic Thermoelectrics

High Conductivity and Electron‐Transfer Validation in an n‐Type Fluoride‐Anion‐Doped Polymer for Thermoelectrics in Air

Ladder-Type Oligo-<i>p</i>-phenylene-Containing Copolymers with High Open-Circuit Voltages and Ambient Photovoltaic Activity

Pyrazine-Flanked Diketopyrrolopyrrole (DPP): A New Polymer Building Block for High-Performance N-Type Organic Thermoelectrics

Realizing p‐Type and n‐Type Doping of a Single Conjugated Polymer via Incorporation of a Thienoisatin‐Terminated Quinoidal Unit

Controlling the Thermoelectric Performance of Doped Naphthobisthiadiazole‐Based Donor–Acceptor Conjugated Polymers through Backbone Engineering

Balancing the electrical conductivity and Seebeck coefficient by controlled interfacial doping towards high performance benzothienobenzothiophene-based organic thermoelectric materials

Toward High Performance n-Type Thermoelectric Materials by Rational Modification of BDPPV Backbones.

An n‐Type Conjugated Polymer with Low Crystallinity for High‐Performance Organic Thermoelectrics

Improved synthesis and photovoltaic performance of donor–acceptor copolymers based on dibenzothiophene-cored ladder-type heptacyclic units

Conjugated Polymers with an Oxindole‐Terminated Quinoidal Unit: Energy Level Modulation Toward Air‐Stable n‐Doped Conductors

Enhancing the Conductivity and Thermoelectric Performance of Semicrystalline Conducting Polymers Through Controlled Tie Chain Incorporation

Enhanced Thermoelectric Performance of a Donor–Acceptor-Based Two-Dimensional Conjugated Polymer with High Crystallinity

Poly(pentacyclic lactam-alt-diketopyrrolopyrrole) for field-effect transistors and polymer solar cells processed from non-chlorinated solvents