Abstract:The global trend toward decarbonization is inspiring researchers to search for low or even zero carbon fuels for internal combustion engines. Ammonia (NH3) is considered a potential alternative fuel to conventional gasoline and diesel without carbon emissions. Although it is not an ideal fuel for use in engines due to its poor combustion properties, the use of hydrogen (H-2), which has low ignition energy and can be decomposed from ammonia, as a combustion promoter can enhance its suitability for engine applications. A careful literature review indicates that the relatively few existing studies on NH3/H-2 engines and the uncertainty of the NH3/H-2 chemistry under typical high-temperature and high-pressure engine environments limit the determination of the ammonia-tohydrogen ratio. However, this question is important when converting an existing engine to ammonia operation because it is related to compression ratio determination, aftertreatment design, ECU mapping, and on-board hydrogen production rate requirements. In other words, this outstanding question would affect the simultaneous design of other accessory systems and the development of ammonia engines. To increase the knowledge of the hydrogen concentration in the fuel feed of ammonia fueled engines in the engine community, this study discusses this question from the perspective of laminar flame speed (LFS), because it is closely related to reactivity, diffusivity, and exothermicity, which is a macroscopic parameter of premixed combustion and directly affects the efficiency and emissions of spark ignition engines. Specifically, the required proportion of hydrogen blended with ammonia is determined by comparing the NH3/H-2 reaction time scale with the millisecond combustion time scale in typical engines. The results show that high temperature enhances the LFS of ammonia, hydrogen and their mixtures, while pressure has an inhibitory effect. In addition, increasing the compression ratio and avoiding fuel-lean operation are effective ways to improve the performance of ammonia combustion with less hydrogen. Considering the high required hydrogen consumption rate and the full load conditions that guarantee high combustion efficiency, off-road application may be a suitable scenario for ammonia-hydrogen engines. Before applying ammonia to automobiles, the technology for onboard hydrogen production should be effectively developed.

Experimental investigation of operating conditions on performance and emissions of spark ignition ammonia direct injection engine

Numerical Investigation of a Heavy Duty Compression Ignition Engine Converted to Ammonia Spark Ignition Operation

Influence of Hydrogen on the Performance and Emissions Characteristics of a Spark Ignition Ammonia Direct Injection Engine

Operable range extension of ammonia direct injection spark ignition engine by hydrogen addition

Hydrogen Enriched Ammonia Engines: Assessment of Hydrogen Concentration in the Fuel Feed from the Laminar Flame Speed Viewpoint

Combustion of Premixed Ammonia and Air Initiated by Spark- Ignited Micro-gasoline-jet in a Constant Volume Combustible Vessel

Computational Analysis of Ammonia-Hydrogen Blends in Homogeneous Charge Compression Ignition Mode of Engine Operation

Numerical Investigation of the Effect of Ammonia Addition on the Performance of a Stoichiometric Operated Natural Gas Spark Ignition Engine

Numerical Investigation of Engine Performance and Emission Characteristics of an Ammonia/Hydrogen/n-Heptane Engine Under RCCI Operating Conditions

Experimental investigation of variable compression ratio and ignition timing effects on performance, combustion, and Nox emission of an ammonia/hydrogen-fuelled Si engine

An Evaluation of the Conversion of Gasoline and Natural Gas Spark Ignition Engines to Ammonia/Hydrogen Operation From the Perspective of Laminar Flame Speed

Numerical investigation of ammonia-rich combustion produces hydrogen to accelerate ammonia combustion in a direct injection SI engine

Combustion and Emission Characteristics of an Ammonia-Hydrogen Engine under Passive- and Active-Jet Ignition

Evaluation of ammonia-gasoline co-combustion in a modern spark ignition research engine

Numerical Simulation of Ammonia-Hydrogen Engine Using Low-Pressure Direct Injection (LP-DI)

Experimental study on the effect of hydrogen substitution rate on combustion and emission characteristics of ammonia internal combustion engine under different excess air ratio

Study on Combustion and Emission Performance of Dual Injection Strategy for Ammonia/Hydrogen Dual-Fuel Engine

Assessing Hydrogen-Ammonia Ratios to Achieve Rapid Kernel Inception in Spark Ignition Engines

Evaluation of hydrogen injection and oxygen enrichment strategies in an ammonia-hydrogen dual-fuel engine under high compression ratio

Numerical Investigation of a Heavy-Duty CI Engine Converted to Ammonia SI Operation

Experimental investigation of the effect of ammonia substitution ratio on an ammonia-diesel dual-fuel engine performance