Influence analysis on the shear behaviour and failure mode of grout-filled jointed rock using 3D DEM coupled with the cohesive zone model
Xuewei Liu,Wei Deng,Bin Liu,Quansheng Liu,Yuanguang Zhu,Ying Fan
DOI: https://doi.org/10.1016/j.compgeo.2022.105165
IF: 5.218
2022-12-22
Computers and Geotechnics
Abstract:Grouting is one of the primary methods used to reinforce the strength of fractured rock masses. In this study, a three-dimensional discrete element method (3D Co-DEM) grouted joint shear model, which consists of upper and lower intact rock blocks, 3D real joint surfaces and a grout-filled layer, was developed with the cohesive zone model. The 3D real joint surface was imported into the model using 3D scanning point cloud data, and the grout-filled layer was described by a cohesive zone model. Then, a numerical simulation algorithm was developed to implement the numerical direct shear test and grout-filled layer cracking simulation. Also, the parameters of the proposed method were calibrated, and the effectiveness of the cohesive zone model and direct shear numerical test were verified by comparison with analytical and experimental results. Finally, grouted jointed specimens with regular sawtooth were used to analyse the influencing factors of shear characteristics. Numerical tests showed that shear peak strength and residual strength decrease with increasing grout water-cement ratio but increase with increasing JRC. Specifically, with increasing sawtooth inclination angle, the shear peak strength first decreases and then increases, while the peak shear strength increases as the sawtooth height increases.
computer science, interdisciplinary applications,geosciences, multidisciplinary,engineering, geological