Abstract:Today, population growth and the need for constructing adjacent buildings have raised the likelihood of pounding between adjacent buildings with different dynamic characteristics. The pounding force applied to adjacent buildings during an earthquake is intensive and may cause total or partial damage to structural elements, leading to collapse. It disturbs and complicates the functioning of buildings during and after an earthquake. Therefore, the main aim of this paper is to minimize and, if possible, eliminate the pounding force between two adjacent structures by considering three objective functions. For this aim, the tuned mass damper is utilized here. Also, this paper aims to reduce the number of collisions between different stories of adjacent buildings through a tuned mass damper system. For this purpose, two adjacent steel moment frames with six and ten stories are nonlinearly modeled and validated using the concentrated plasticity model in OpenSees. Moreover, the pounding element is nonlinearly modeled and validated. Then, tuned mass dampers (TMDs) are used on the roofs of the structures. They are optimized in stiffness, mass, and damping coefficient using the grey wolf optimization (GWO) algorithm. Nonlinear time history analysis (NLTHA) is performed under nine far- and near-field earthquakes. The pounding force and structural responses are analyzed, including maximum story acceleration, maximum inter-story drift, and base shear in the TMD-controlled and uncontrolled adjacent buildings. Finally, the Park-Ang damage index is evaluated for the structures with and without the TMD system. It has been found that the maximum pounding force, the maximum acceleration of the stories, the base shear, the drift ratio, and the number of collisions significantly reduce (or omit) in the presence of TMDs when the objective function is considered to be the minimization of the maximum pounding force. It is shown that the maximum pounding force generally declines to zero for this objective function.

Reduced-order model for RBDO of multiple TMDs on eccentric L-shaped buildings subjected to seismic excitations

A Direct Displacement-Based Design Procedure for Base-Isolated Building Structures with Lead Rubber Bearings (Lrbs)

Reliability based robust design optimization for tuned mass damper in passive vibration control of deterministic/uncertain structures

Reliability-based optimization of supported pendulum TMDs' nonlinear track shape using Padé approximants

A new model order reduction strategy adapted to nonlinear problems in earthquake engineering

An Adaptive Substructure -Based Model Order Reduction Method for Nonlinear Seismic Analysis in OpenSees

Stochastic Optimal Control of Wind-Excited Tall Buildings Using Semi-Active Mr-Tlcds

Multiobjective Reliability-Based Design Optimization of the Fuzzy Logic Controller for MR Damper-Based Structures

A multi-scale model-order reduction strategy for vibration analysis of coupled structures with local inhomogeneities

Inerter-based tuned mass dampers for response control of multi-degree-of-freedom structures subjected to wind and earthquake excitations

Toward Optimizing Dynamic Characteristics of Non-conventional TMDs in Multi-degree-of-Freedom Systems

Frequency domain transfer function based multimodal design method for seismic mitigation of building structures

Bi‐tuned semi‐active TMDs: Multi‐hazard design for tall buildings using gradient‐based optimization

Structural control of high-rise buildings subjected to multi-hazard excitations using inerter-based vibration absorbers

Utilizing tuned mass damper for reduction of seismic pounding between two adjacent buildings with different dynamic characteristics

A Generalized Translational-RotationalTuned Mass Damper (T-R TMD) System ForPassive Control Of Vibrations In Structures

Optimum Design of Absorber for MDOF Structures

Optimal TMD design for torsional balance of asymmetrical 3D structures considering soil–structure interaction

Real-Time Hybrid Simulation of Full-Scale Tuned Liquid Column Dampers to Control Multi-Order Modal Responses of Structures

Graphical Design Methodology of Multi-Degrees-of-Freedom Tuned Mass Damper for Suppressing Multiple Modes

Design and Evaluation of Tuned Inerter-Based Dampers for the Seismic Control of MDOF Structures