Water-Droplet Impact and Sliding Behaviors on Slippery Surfaces with Various Weber Numbers and Surface Inclinations

Bo Li,Lei Fan,Jie Bai,Huiying Xiang,Yuan Yuan
DOI: https://doi.org/10.3390/coatings13020264
IF: 3.236
2023-01-23
Coatings
Abstract:The dynamic behaviors of water droplets on a slippery surface are significant to practical anti-icing applications. Herein, the impact and sliding behavior of water droplets on lubricant-infused surfaces (LISs) were investigated with a high-speed camera. LISs were prepared by infusing perfluoropolyether oils into anodized porous surfaces. The results show that the maximum spreading diameter and retraction velocity of the impact droplet increased with the We number. For LIS-100, the spreading factor at 2.5 ms increased from 2.00 to 3.88 with We increasing from 30 to 267. Low-viscosity lubricant facilitated the retraction speed and rebound of droplet impact on the surface, while high-viscosity lubricant contributed to the lubricant stability of the LIS. Additionally, high inclination angle (θ) facilitated the rapid shedding of water droplets on the surface. The velocity increased rapidly from 1.04 to 4.66 mm/s with θ increasing from 15° to 45°. The LIS prepared with low-viscosity lubricant had a high sliding velocity, and the sliding velocity of water droplets on LIS-100 was about seven times faster than that on LIS-104. This work reveals the impacting law of water droplets on LISs and provides useful information for the design of LISs under drop impact conditions.
materials science, multidisciplinary,physics, applied, coatings & films
What problem does this paper attempt to address?
The problem that this paper attempts to solve is to study the impact and sliding behaviors of water droplets on Lubricant - Infused Surfaces (LISs) with different Weber numbers ($We$) and surface inclination angles. Specifically, the author experimentally observed the dynamic behaviors of water droplets on these surfaces, including the spreading, retraction, and rebound processes of water droplets, aiming to reveal the laws of water droplet impact on LISs and provide useful information for designing LISs suitable for water droplet impact conditions. ### Research Background and Problems - **Self - cleaning Coatings**: They are divided into hydrophilic and hydrophobic types and are widely used in fields such as anti - icing and antifouling. - **Lubricant - Infused Surfaces (LISs)**: Inspired by the pitcher plant, a carnivorous plant, they are prepared by injecting lubricant into a porous surface. LISs have excellent dynamic waterproof performance, can delay the freezing time of water droplets and reduce the ice adhesion force, so they have potential in anti - icing applications for outdoor equipment such as transmission lines, wind turbines, and airplanes. - **Water Droplet Impact Behaviors**: The dynamic behaviors of water droplet impact on LISs determine whether the water droplets will bounce or slide off quickly, which is crucial for the anti - icing performance of LISs. ### Research Purposes - **Explore Water Droplet Impact and Sliding Behaviors**: Observe the impact and sliding behaviors of water droplets under different Weber numbers and surface inclination angles using a high - frame - rate camera. - **Evaluate the Influence of Different Viscosity Lubricants**: Prepare LISs using perfluoropolyether oils (GPL 100 and GPL 104) with different viscosities to study their influence on the dynamic behaviors of water droplets. - **Reveal the Influence Mechanisms**: Analyze the influence of Weber number and surface inclination angle on the maximum spreading diameter, retraction speed, and sliding speed of water droplets to provide a theoretical basis for optimizing the design of LISs. ### Experimental Methods - **Material Preparation**: Prepare a porous aluminum surface by anodizing method, then modify it with a silane solution to increase hydrophobicity, and finally inject the lubricant into the porous surface by vacuum method. - **Characterization Methods**: Observe the sample morphology using a field - emission scanning electron microscope (SEM) and evaluate the wettability of the sample using a contact angle goniometer. - **Experimental Setup**: Use a high - speed camera to record the process of water droplet impact on LISs, and adjust the Weber number by controlling the falling height of water droplets. ### Main Findings - **Influence of Weber Number**: As the Weber number increases, both the maximum spreading diameter and the retraction speed of water droplets increase. For LIS - 100, when the Weber number increases from 30 to 267, the spreading factor at 2.5 milliseconds increases from 2.00 to 3.88. - **Influence of Lubricant Viscosity**: Low - viscosity lubricant is helpful for the rapid retraction and rebound of water droplets, while high - viscosity lubricant is beneficial to the stability of LISs. - **Influence of Surface Inclination Angle**: A higher inclination angle promotes the rapid sliding of water droplets. As the inclination angle increases from 15° to 45°, the sliding speed of water droplets increases from 1.04 mm/s to 4.66 mm/s. ### Conclusion This study reveals the laws of water droplet impact and sliding behaviors under different Weber numbers and surface inclination angles, providing important reference information for designing LISs suitable for water droplet impact conditions.